Hifi Power

McIntosh C22 MkV


McIntosh C22 MkV Tube preamplifier Προενισχυτής με λυχνίες, 7 Αναλογικές Είσοδοι, 2 Balanced, 3 Unbalanced, Είσοδοι Phono MM, MC, Εξοδοι 2 Balanced 2 Unbalanced, Εξοδος Ακουστικών, Δυνατότητα ρύθμισης στάθμης των Εισόδων,  Ρύθμιση Τονικότητας, Απόκριση συχνότητας Frequency Response, Στα +0 -1dB ΑΠΟ 10Hz to 100,000Hz, λόγως σήματος προς θόρυβο 100dB, Πολύ χαμηλή παραμόρφωση 0,08%, λυχνίες 5 Χ 12AX7a, 1 Χ 12AT7 Διαστάσεις ΠxΥxΒ 44.5×15.2×45.7 cm Βάρος 11.3 kg, Εγγύηση 3 έτη Αντιπροσωπείας,  Αποστολές εμπορευμάτων σε όλη την Ελλάδα, Δυνατότητα Δόσεων – Διακανονισμού,  Παρακαλούμε επικοινωνήστε στο 2103845676 για επιβεβαίωση του αποθέματος και τιμής.  

McIntosh C22 Preamplifier Mk V    

This newest version of our C22 Vacuum Tube Preamplifier – the Mk V – is the direct replacement to our highly regarded C70 Limited Edition 70th Anniversary Vacuum Tube Preamplifier, which commemorated our 70th Anniversary that took place in 2019. The new C22 Mk V is the latest McIntosh vacuum tube preamplifier to carry the cherished C22 model number. It has all the performance of the acclaimed C70 but with the hallowed C22 moniker and its signature glass and aluminum front panel design.

McIntosh C22 Preamplifier Mk V    
The C22 Mk V uses one 12AT7 and five 12AX7A vacuum tubes which can be seen through a glass panel located on the top of the preamp. Knobs and rocker switches operate all control functions while modern LED lights indicate input selection and volume level. The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.

McIntosh C22 Preamplifier Mk V    
Bypassable bass and treble tone controls are located on the front panel and can be adjusted in 2dB increments via rotary knobs. Impedance and capacitance for the phono inputs can also be adjusted via separate rotary knobs. In addition to setting the listening level, the volume knob can also be used to adjust the relative volume balance between the left and right audio channels. The ¼” headphone jack is powered by our High Drive headphone amplifier and features our Headphone Crossfeed Director (HXD®) technology. HXD improves the sound localization for headphone listening by restoring the directionality component of the sound stage that’s normally only heard from loudspeakers.

McIntosh C22 Preamplifier Mk V    
Our Power Control technology is included with four ports that can automatically turn other connected McIntosh components such as amplifiers, CD players or turntables, on and off. Data ports are also present and can control basic functions of connected McIntosh source components via the included remote control.

McIntosh C22 Preamplifier Mk V    
The C22 Mk V sits atop a stunning polished stainless steel chassis and features the timeless McIntosh illuminated logo, control knobs, and aluminum end caps. With its retro black glass and aluminum front panel design, the C22 Mk V will fit right in with McIntosh home audio systems of any era – from the 1950s to current day. Contact your local dealer to learn more.

C22 MkV_Lifestyle     C22 MkV_remote C22 MkV_Hero     C22 MkV_Back

 

 

  Γενικές Πληροφορίες       Χρήσεως Πληροφορίες,  

Τεχνικά Χαρακτηριστικά

Number of Channels 2
Total Harmonic Distortion 0.08%
Frequency Response
+0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 15Hz to 100kHz
Maximum Volts Out (Balanced / Unbalanced)
16V RMS / 8V RMS
Sensitivity High Level (Balanced / Unbalanced)
900mV / 450mV
Sensitivity Phono (Moving Coil) 0.45mV
Sensitivity Phono (Moving Magnet) 4.5mV
Signal To Noise Ratio (High Level) 100dB
Signal To Noise Ratio (Moving Coil) 75dB
Signal To Noise Ratio (Moving Magnet) 75dB
Voltage Gain (High Level) 15dB
Voltage Gain (Moving Coil) 60dB
Voltage Gain (Moving Magnet) 40dB
Input Impedance (Balanced / Unbalanced) 44K ohm, 22K ohm
CONNECTIVITY Balanced Input 2
Unbalanced Input 3
Phono Input Moving Coil 1 (adjustable)
Phono Input Moving Magnet 1 (adjustable)
Balanced Variable Output 2
Unbalanced Fixed Output 0
Unbalanced Variable Output 2
Headphone Output
1/4″ High Drive with Headphone Crossfeed Director (HXD®)
Input Level Match No
Home Theater PassThru No
Unbalanced Analog Connector Type
Premium gold-plated solid brass
Service Port 0
CONTROL
Tone Controls Bass and Treble
Tone Bypass and Input Assign
Tone Bypass: Yes
Input Assign: No
RS232 Control Input No
Power Control Output 2 Main, 2 Switched
Rear Panel Data Port 5
Rear Panel IR Sensor Input Yes
GENERAL SPECIFICATIONS
Multi-Chassis or Single
Single, two layer
Output Meters No
Vacuum Tube or Solid State
Vacuum Tube: (5) 12AX7A and (1) 12AT7
Power Consumption (On) 50 Watts
WEIGHTS & DIMENSIONS
Dimensions (W x H x D)
17.5″ (44.45cm) x 6″ (15.24cm) x 18″ (45.72cm)
Weight 25 lbs (11.3kg),