HC Power Cable
HC Power Cable Clear, καλώδιο ρεύματος HI END με θωράκιση, τρία καλώδια με εσωτερικούς αγωγούς εμβαδού 3 x 2.5 mm 14 AWG – 3 x 4 mm 12 AWG – 3 x 6 mm 10 AWG καθαρού χαλκού αγωγοί με επεξεργασία, μόνωση αγωγών με PVC, μηχανική θωράκιση των αγωγών με PVC και θωράκιση ηλεκτρική με πλέγμα καθαρού χαλκού επικασσιτερωμένου, εξωτερικό περίβλημα από PVC χρώμα διάφανο, εξωτερική διάμετρος ανάλογη της διατομής, άκαυστο και ευκαπτό για μόνιμες και εξωτερικές ηλεκτρικές εγκαταστάσεις, Παρακαλούμε επικοινωνήστε στο 210 3845676 για επιβεβαίωση του αποθέματος και τιμής, Δυνατότητα Διακανονισμού – Δόσεων – Ανταλλαγών, Αποστολές εμπορευμάτων σε όλη την Ελλάδα, Εγγύηση 2 Ετη,
Technical data Cable structure Properties
• Bare copper, fine wire conductors, bunch stranded to DIN VDE 0295 cl.5, BS 6360 cl.5 and IEC 60228 cl.5 • Special-PVC control cable adapted • Extensively oil resistant, oil-/chemical resistance see table Technical Informations • The materials used in manufacture are
cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers • Temperature range • flexing -15°C to +80°C fixed installation -40°C to +80°C Core insulation of special PVC compound type Z 7225 • Core identification to JB/OB colour code • GN-YE conductor, 3 cores and above in the outer layer • Nominal voltage up to 1,5 mm² U0/U 300/500 V from 2,5 mm² U0/U 450/750 V
Tests
• PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B) • Cores stranded in layers with • Test voltage 4000 V optimal lay-length • Breakdown voltage min. 8000 V • Inner sheath of PVC • Tinned copper braided screen, approx. 85% coverage • Insulation resistance min. 20 MOhm x km • Mutual capacitance • Outer sheath of special PVC Note acc. to different cross-sections 0,5 up to 2,5 mm²: core/core approx. 150 nF/km core/screen approx. 270 nF/km • Sheath colour transparent • G = with green-yellow conductor • with meter marking x = without green-yellow conductor (OB). • by 5 cores with VDE-Reg. No. • AWG sizes are approximate equivalent • Coupling resistance values. The actual cross-section is in mm². max. 250 Ohm/km • unscreened analogue type: JB-500 JB-750 • Minimum bending radius flexing 10x cable Ø fixed installation 5x cable Ø • Radiation resistance up to 80×106 cJ/kg (up to 80 Mrad)
Application
For use as a data and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening ensures a high degree of interference protection. The screening density assures disturbance-free transmission of all signals and impulses. The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical view of the tinned copper braid. These cables are suitable for flexible use for medium mechanical stresses with free movements. The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above application. EMC = Electromagnetic compatibillity To optimize the EMC features we recommend a large round contact of the copper braiding on both ends. The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
Τεχνικά Χαρακτηριστικά:
• Temperature range • flexing -15°C to +80°C fixed installation -40°C to +80°C
• Core identification to JB/OB colour code
• GN-YE conductor, 3 cores and above in the outer layer
• Nominal voltage up to 1,5 mm² U0/U 300/500 V from 2,5 mm² U0/U 450/750 V
• PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2,
• Cores stranded in layers with
• Test voltage 4000 V optimal lay-length
• Breakdown voltage min. 8000 V • Inner sheath of PVC
• Tinned copper braided screen, approx. 85% coverage
• Insulation resistance min. 20 MOhm x km
• Mutual capacitance • Outer sheath of special PVC Note acc. to different cross-sections 0,5 up to 2,5 mm²:core/core approx. 150 nF/km
core/screen approx. 270 nF/km
• Sheath colour transparent • G = with green-yellow conductor
• with meter marking x = without green-yellow conductor (OB).
• AWG sizes are approximate equivalent
• Coupling resistance values. The actual cross-section is in mm². max. 250 Ohm/km
,
