Hifi Power

dbx 231S

Τιμή 170 €

dbx 231S, γραφικό equalizer 1/3 της οκτάβας και 2×31 περιοχών constant Q. Επιλεγόμενο εύρος αυξομείωσης 6/12dB, φίλτρο αποκοπής χαμηλών συχνοτήτων στα 40Hz με 12dB ανά οκτάβα. Iσορροπημένες (balanced) είσοδοι και έξοδοι με XLR & TRS jacks, δυναμική περιοχή 108dB και ύψος 2U.

 

dbx_231s_back_large

Exceptional sound and rugged reliability
When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 231s includes two 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Features:
  Dual 31-band, 1/3-octave Constant Q frequency bands
  Switchable boost/cut ranges of ±6 or ±12 dB
  Front panel bypass switch
  ±12 dB input gain range
  4-segment LED ladders for monitoring output levels
  XLR and TRS Inpts and Outputs
  Frequency Response of <10Hz to >50kHz
  Dynamic range of greater than 108dB

Τεχνικά Χαρακτηριστικά:

  Input Connectors    1/4″ TRS, female XLR (pin 2 hot)
  Input Type    Electronically balanced/unbalanced, RF filtered
  Input Impedance    Balanced 40k ohm, unbalanced 20k ohm
  Max Input    >+21dBu balanced or unbalanced
  CMRR    >40dB, typically >55dB at 1kHz
  Output Connectors    1/4″ TRS, male XLR (pin 2 hot)
  Output Type    Impedance-balanced/unbalanced, RF filtered
  Output Impedance    Balanced 100 ohm, unbalanced 50 ohm
  Max Output    >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
  Bandwidth    20Hz to 20kHz, +0.5/-1dB
  Frequency Response    <10Hz to >50kHz, +0.5/-3dB
  Dynamic Range    Typically >112dB
  Signal to Noise Ratio    Typically >95dB
  THD+Noise    <0.003%
  Interchannel Crosstalk    <-90dB, 20Hz to 20kHz
  Bypass Switch    Bypasses the graphic equalizer section in the signal path
  Low cut Switch    Activates the 50Hz 12dB/octave high-pass filter
  Range Switch    Selects either +/- 6dB or +/-12dB slider boost/cut range
  Operating Voltage    100-240VAC 50/60Hz
  Power Consumption    15W
  Power Connector    IEC receptacle
  Unit Weight    6.2 lbs.(2.81 kg)
  Shipping Weight    7.9 lbs.(3.58kg)
  Dimensions    3.5″ (8.9cm) H x 6″(15.24cm) D x 19″ (48.26cm) W