Hifi Power

Ortofon TA110


Ortofon TA110 Tonearm ΒΡΑΧΙΟΝΑΣ ΤΥΠΟΥ S ΜΕ ΑΠΟΣΠΟΜΕΝΟ SHELL, ΕΝΕΡΓΟ ΜΗΚΟΣ 9″. ΡΥΘΜΙΣΗ ANTI-SKATE, ΡΥΘΜΙΣΗ ΥΨΟYΣ VTA, ΚΑΛΩΔΙΟ 5pin DIN, ΒΑΡΟΣ 470g,

The TA-110 is given a precision machined slit in the middle of the aluminium tube. A piece of Ortofon’s special vibration damping rubber is inserted into the slit. An armtube without slit and rubber damper is symmetrical in a vertical and lateral plane with respect to vibrations. The slit breaks this symmetry, and mounting the rubber insert gives the desired damping. 

TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings

TA-110 has a standard 5-pin DIN connector for tonearm cable

The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)

Counterweight with Inner/Outer scale

Inner scale to be applied with main counterweight

Outer scale to be applied when extra mass ring is added

Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g

TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template

Extra mass ring for heavier cartridge and headshell combinations included, e.g. SPU cartridges (the extra mass ring may need to be attached to achieve proper tracking force)

Extra mass ring weight 45g

 

Τεχνικά Χαρακτηριστικά

Effective mass without headshell: 3.5 g

Mass of supplied headshell: 15.5 g

Effective armlength (distance between the stylus and pivot point): 231.0 mm

Mounting distance (distance between the pivot point and turntable center): 213.0 mm

Offset angle: 23.9 degrees

Overhang: 18.0 mm

Tracking force adjusting range (direct reading): 0-3 g

Height adjustment range: 35-55 mm

Diameter of the armbase mounting hole: 19-20 mm

Diameter of the center shaft of tonearm: 18.0 mm

Inner null point: 66 mm

Outer null point: 120.9 mm

Counterweight for cartridge + headshell mass between 21 and 28 g included

Headshell LH-2000E included 

Headshell LH-2000E weight: 15.5 g

TA-110 total weight including headshell: 470 g

Set of tonearm cables 6NX-TSW-1010 included

Extra mass ring for heavier cartridges included  

Extra mass ring weight 45 g,