Isoacoustics Orea Bronze
Isoacoustics Orea Bronze, Αντικραδασμικό πόδι μηχανημάτων ήχου, εξαλείψει των κραδασμών παρέχοντας μεγαλύτερη ευκρίνεια και εστίαση στον ήχο. Το Bronze είναι ιδανικό για ελαφρά μηχανήματα, ενισχυτές, DAC, CD, ηχεία και πικάπ. Κατασκευάζεται από κατεργασμένο ανοξείδωτο χάλυβα, το Bronze έχει σχεδιασμό χαμηλού προφίλ, λειτουργικό βάρος μέχρι 3.6kg, Έχει ένα χρωματιστό δακτύλιο στην βάση του που δηλώνει το μοντέλο και το βάρος.με μεγαλύτερη ευελιξία του αριθμού των μονάδων που θα χρησιμοποιήσουν, Συνιστάτε τουλάχιστον 3 τεμάχια κάτω από κάθε συσκευή, ανάλογα με το βάρος. είναι σχεδιασμένα να χρησιμοποιούνται σε πολλαπλάσια τεμάχια για να ταιριάζουν με το βάρος του μηχανήματος ή του ηχείου. το συνολικό βάρος του υπολογίζειται για την τοποθέτηση του αριθμού των αποσβεστικών στηριγμάτων της συσκευής, Συνήθως χρησιμοποιούνται 3 ή 4 OREA για κάθε συσκευή ή ηχείο, σύνηθως χρησιμοποιούνται 3 ή 4 Orea αποσβεστικά στηρίγματα,
About Orea Series audio isolation feet
Experience the Orea Series audio component isolation feet, designed to eliminate parasitic vibrations and provide greater sound clarity and focus. Ideal for electronic components such as Amplifiers, DACs, CD Players, Speakers, and Turntables, the OREA isolation feet are made of machined stainless steel and feature a low-profile design to minimize any increase in height.
Each OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.
Works with or without feet
The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively, you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.
About Orea Series audio isolation feet
Experience the Orea Series audio component isolation feet, designed to eliminate parasitic vibrations and provide greater sound clarity and focus. Ideal for electronic components such as Amplifiers, DACs, CD Players, Speakers, and Turntables, the OREA isolation feet are made of machined stainless steel and feature a low-profile design to minimize any increase in height.
Each OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.
Greater sound clarity
The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component, while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s, which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic, three-dimensional sound.
The OREA’s are designed to be used in multiples to match the weight of the component or speaker. The total weight capacity is calculated as follows:
Total Weight Capacity = [Weight cap. per isolator] x [Qty of isolation feet]
,
