McIntosh MHA100
MHA100 McINTOSH Ενισχυτής, Ενισχυτής ακουστικών, DAC μετατροπέας ψηφιακού σήματος σε αναλογικό, Ισχύς εξόδου ακουστικών 1 Watt με τρείς επιλογές αντίστασης εξόδου 8-40 Ohms, 40-150 Ohms, 150-600 Ohms, Ισχύς Ενισχυτή 50 Watts στα 8 Ohms, Ολική αρμονική παραμόρφωση 0.005%, Ψηφιακές είσοδοι Ομοαξονική 16Bit, 24Bit – 32kHz to 192kHz, Οπτική 16Bit, 24Bit – 32kHz to 192kHz, AES/EBU 16Bit, 24Bit – 32kHz to 192kHz, USB 16Bit, 24Bit, 32Bit – 32kHz to 192kHz, Αναλογικές είσοδοι δύο Balanced Unbalanced, Εξοδος Ακουστικών βύσμα καρφί Jack 1/4″, Εξοδος Unbalanced RCA, Ρύθμιση τονικότητας χαμηλών συχνοτήτων, Είσοδος Εξοδος ελέγχου λειτουργίας, Διαστάσεις ΠxYxB 29.2 x 14.1 x 45.7 cm, Βάρος 12 kg, Εγγύηση 3 έτη Αντιπροσωπείας, Αποστολές εμπορευμάτων σε όλη την Ελλάδα, Δυνατότητα Δόσεων – Διακανονισμού, Παρακαλούμε επικοινωνήστε στο 2103845676 για επιβεβαίωση του αποθέματος και τιμής.
The MHA100 is the first dedicated headphone amplifier from McIntosh and takes advantage of unique McIntosh technologies to yield the best possible personal listening experience regardless of the headphones you use. It employs a new adaptation of our unique Autoformer technology to produce three headphone impedance ranges of 8-40, 40-150 and 150-600 ohms so that every headphone – from ear buds to studio quality phones – will receive the optimal McIntosh sound. 
«The MHA100 addresses headphone listening for the purist who wants no compromises.» – Hi-Fi News
«The Cadillac of headphone amplifiers.» – CNET
It features our new Headphone Crossfeed Director (HXD) to allow high quality recordings to image like conventional speakers in your headphones, bringing new depth and spatiality to your music. Four digital inputs allow the McIntosh Digital Engine to decode your digital music at up to 32 bits and 192kHz for maximum analog fidelity and enjoyment; two analog inputs are also available.
«The soundstage this amp presents through headphones is big and lifelike, and its accuracy and clarity across the frequency spectrum are reference-level good.» – Tone Audio 
«Nirvana from the first moment.» – Tendances Électroniques & Design
Love to listen to your headphones while working on your computer? Compared to our other amplifiers, the MHA100 is more compact and fits great on a desk, allowing you to enjoy your music while working. Its smaller size gives you additional flexibility to locate it almost anywhere in your space.
«A headphone amp worthy of the McIntosh legacy… The MHA100 is a reference-level, musically engaging headphone amp/DAC combo from top to bottom.» – Audio360.org
«Perhaps the finest headphone amplifier currently in production.» – The Pro Audio Web Blog
50 watt stereo speaker outputs are included for when you want to enjoy your favorite speakers instead of your headphones; Power Guard® will prevent clipping that could damage your headphones or speakers. Tone controls include a 5 Step Bass Boost Control for further customization. The entire unit is housed in a beautiful polished stainless steel chassis that not only compliments the classic glass front panel, knobs and brushed aluminum end caps, but also any room decor.
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Headphone Output Specifications
Headphone Power OutputHigh Selection: 1W
Normal Selection: 250mW
Headphone Output Impedance 8-40 Ohms, 40-150 Ohms, 150-600 Ohms
Electronic Specifications
Power Output per Channel 50 Watts
Speaker Impedance 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.005%
Intermodulation Distortion 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
Dynamic Headroom 1.5dB
Frequency Response +0,-0.5dB20Hz to 20kHz
Frequency Response, +0, -3dB10Hz to 100kHz
Sensitivity (Unbalanced) 300mV
Sensitivity (Balanced) 600mV
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio105dB
Input Impedance (Balanced / Unbalanced)25K/25K
Damping Factor>150
Preamplifier Output 3V (8V maximum)
Preamplifier Output Impedance 500 Ohms
Voltage Gain 36.5dB
Power Guard <2% THD with up to 16dB overdrive at 1kHz
Digital Audio Specifications
Digital Coaxial Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital Optical Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital AES/EBU Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital USB Input Sample Rate 16Bit, 24Bit, 32Bit – 32kHz to 192kHz
Connectivity
Headphone Output1 (1/4″)
High Level Inputs Unbalanced 1 Stereo
High Level Inputs Balanced 1 Stereo
Digital Coaxial Input 1
Digital Optical Input 1
Digital AES/EBU Input 1
Digital USB Input 1
Preamplifier Output 1 Stereo
Control
Tone Controls 5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz
Power Control Input Yes
Power Control Output Yes
General Specifications
Output Meters Yes
Tube or Solid State, Solid State
Power Requirement 120V 50/60Hz, 1.5A
Standby Power Requirement <0.25 Watts
Output Autoformer Yes for Headphones
Weights & Dimensions
Dimensions (W x H x D)11-1/2″(29.2cm) x 5-9/16″ (14.1cm) x 18″ (45.7cm)
Weight 26.5 lbs (12 kg),
