The DMS-300A brings the best of both worlds together—streaming technology and high-performance amplification, all in one sleek, powerful package. Featuring a discrete Class AB amplifier rated at 75 watts per channel, the DMS-300A delivers the rich, dynamic sound Cary Audio is known for, with the modern convenience of today’s top streaming platforms.

Stream your favorite music with ease via Qobuz Connect, TIDAL Connect, Spotify Connect, AirPlay, and Bluetooth, or take full control of your digital library with Roon Ready and UPnP/DLNA compatibility. Whether you’re connecting via Wi-Fi or Ethernet, the DMS-300A ensures reliable, high-resolution playback every time.

With a full suite of digital and analog inputs and outputs, the DMS-300A integrates seamlessly into any system, whether you’re building from scratch or upgrading your existing setup.

Download the free iOS and Android Control APPS for the DMS-300A.

The DMS-300A is Roon Ready. Start your free trial here.

Τεχνικά Χαρακτηριστικά

Master Clock Jitter    Below measurable levels
Digital Sampling Rates (Fs)     44.1 kHz to 768 kHz
Digital Filter    32-Bit 8x Oversampling Digital Filter
Digital/Analog Converters    1-2 channel AKM Chipset
BLUETOOTH    Qualcomm aptX® decoder and transmitter
Analog Filter    3rd Order Bessel
Analog SUB Outputs    Single–Ended RCA
Digital Outputs    Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Inputs    USB-A x 3, SD Card x 1
BLUETOOTH In
Coaxial x1, Toslink x1
Digital Input Sample Rate    USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, 128, 256 and 512.
BLUETOOTH Sample Frequency (Fs) 48 kHz, 16 bit.
Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Control    Trigger output 12VDC x1
IR control x1
Communication    Ethernet
Wi-Fi 802.11 b/g/n
Power Input    Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption    255 Watts
Weight    26 lbs.
Dimensions    3.75″ H x 17.25″ W x 12.5″ D
 

POWER AMPLIFIER

Analog Input    Single-Ended RCA x 3 for Main-In, Line 1, Line 2
3.5mm Stereo Jack x 1
Analog Input Impedance    10K Ω Unbalanced
Power Amplifier Output    2 x 75W RMS in 8 Ω from 20Hz to 20KHz
2 x 125W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type    Solid State, Power MOSFET Transistor, Class A/B
Frequency Response    10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SAMPTE-1M)    <0.5%
S/N Ratio    >100dB, “A” Weighted
Protections    Full short circuit, thermal, Ultrasonic, RF Signal muting & Current limiter.

AUDIO (LPCM)

Frequency Range    2 Hz – 22 kHz (44.1 kHz)
Amplitude Linearity    0.1 dB (20 Hz – 20 kHz)
Phase Linearity    3 degrees (20 Hz – 20 kHz)
Dynamic Range    117 dB (1 kHz)
Signal-to-Noise Ratio    107 dB (1 kHz)
Channel Separation    106 dB (1 kHz)
Total Harmonic Distortion    0.0004% (1 kHz)
Pre-Amp Output Level    3.0V RMS (220 Ω output impedance) for maximum volume
 

NETWORK, USB, SD CARD PLAYBACK

Playback Format Supply    .dsf, .dff (DSD64, 128, 256, 512), .aif, .aiff, .alac, .flac, .m4a, .mp4, .wav, .ape, .mp3, .aac, .wma, .ogg, .asf
Frequency Range    2 Hz – 100 kHz
Signal System    16, 20, 24, & 32 bit PCM and 1 bit DSD
Sampling Frequency    44.1 kHz to 384 kHz PCM and 2.822MHz – 22.5792 MHz DSD
Dynamic Range    117 dB
DSD System Clock    Frequency 22.5792 MHz
Signal-to-Noise Ratio    107 dB
 

SPDIF PLAYBACK; COAXIAL, TOSLINK (LPCM)

Frequency Range    2 Hz – 80 kHz
Signal System    16, 20, and 24 bit
Sampling Frequency    44.1 kHz to 192 kHz PCM
Dynamic Range    117 dB
System Clock    Frequency 22.5792 MH
Signal-to-Noise Ratio    107 dB

Χρήσεως Πληροφορίες,

 
This means despite the original sample rate of the MQA file, the MQA decoder will extrapolate the file to either a 705.6 or 768 kHz sampling rate for stunning realism and studio quality sound.  For non-MQA files, AiOS can stream or playback native PCM files up to 32 bit 384 kHz (.WAV files up to 768 kHz), plus DSD 64, 128, 256, and 512. Connect AiOS to your home network (Wi-Fi or Ethernet) and stream all of your digital music stored on your networked computer(s) or NAS drive(s) with simple plug N play UPnP, DLNA, and SMB connectivity. Also, available through your home network connection are integrated internet music streaming services, Spotify, TIDAL, vTuner, and others being added. For those that may find a home network connection too intimidating, AiOS allows you to insert a SD Card into the front SD Slot. You can also use a USB flash drive or USB hard drive loaded with digital music files directly to AiOS’ three USB-A inputs, all without a computer or network connection for direct playback! How about Bluetooth? Today, Bluetooth is ubiquitous and AiOS can certainly connect to your smartphone or tablet using the latest Qualcomm aptX© Bluetooth technology. However, AiOS has an extra trick up its sleeve. AiOS can SEND any of its selected sources to Bluetooth enabled headphones or speakers for a completely wireless music system. Place AiOS anywhere to add beauty and elegance to any room or décor and don’t fuss over unsightly wires when paired to a set of Bluetooth enabled speakers.

Speaking of beauty and elegance, AiOS is visually transformative. With the touch of a button, AiOS can change its backlit keys/buttons and center LCD display (together or individually) to six different preset colors including one custom color preset, or adjust any color as you see fit within the entire color spectrum. As if the all-aluminum gunmetal gray chassis and side panels (standard) weren’t handsome enough, AiOS offers five additional side panel color options to ensure AiOS can create the perfect blend of sight and sound to match both your lifestyle and décor choices within any setting.

Finally, AiOS includes multiple analog and digital inputs and outputs, including subwoofer output, preamplifier output, and more! Whether using AiOS as a secondary music system, or as the centerpiece of your home entertainment system, AiOS is right at home within a metropolitan condominium setting, office, bedroom, game room, dormitory, or any room or setting for the design conscience music lover.

The following section describes the AiOS basic specifications. The specifications are subject to change without notice or obligation.

Master Clock Jitter Below measurable levels
Digital Sampling Rates (Fs)  44.1 kHz to 768 kHz
Digital Filter 32-Bit 8x Oversampling Digital Filter
Digital/Analog Converters 1 – 2 channel AK4490EQ
BLUETOOTH Qualcomm aptX® decoder and transmitter
Analog Filter 3rd Order Bessel
Analog SUB Outputs Single – Ended RCA
Digital Outputs Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Inputs USB-A x 3, SD Card x 1, BLUETOOTH In & Out x1, Coaxial x1, Toslink x1
Digital Input Sample Rate USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, 128, 256 and 512., BLUETOOTH Sample Frequency (Fs) 48 kHz, 16 bit. ,Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Control Trigger output 12VDC x1, IR control x1
Communication Ethernet, Wi-Fi 802.11 b/g/n
Power Input Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption 255 Watts
Weight 15 lbs.
Dimensions 3.0″ H x 14.2″ W x 11.0″ D

POWER AMPLIFIER:
Analog Input Single-Ended RCA x 3 for Main-In, Line 1, Line 2, 3.5mm Stereo Jack x 1
Analog Input Impedance 10K Ω Unbalanced
Power Amplifier Output 2 x 75W RMS in 8 Ω from 20Hz to 20KHz, 2 x 125W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type Solid State, Power MOSFET Transistor, Class A/B
Frequency Response 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SAMPTE-1M) <0.5%
S/N Ratio >100dB, “A” Weighted
Protections Full short circuit, thermal, Ultrasonic, RF Signal muting & Current limiter.

AUDIO (LPCM):
Frequency Range 2 Hz – 22 kHz (44.1 kHz)
Amplitude Linearity 0.1 dB (20 Hz – 20 kHz)
Phase Linearity 3 degrees (20 Hz – 20 kHz)
Dynamic Range 117 dB (1 kHz)
Signal-to-Noise Ratio 107 dB (1 kHz)
Channel Separation 106 dB (1 kHz)
Total Harmonic Distortion 0.0004% (1 kHz)
Pre-Amp Output Level 3.0V RMS (220 Ω output impedance) for maximum volume

NETWORK, USB, SD CARD PLAYBACK:
Playback Format Supply .dsf, .dff (DSD64, 128, 256, 512), .aif, .aiff, .alac, .flac, .m4a, .mp4, .wav, .ape, .mp3, .aac, .wma, .ogg, .asf
Frequency Range 2 Hz – 100 kHz
Signal System 16, 20, 24, & 32 bit PCM and 1 bit DSD
Sampling Frequency 44.1 kHz to 384 kHz PCM and 2.822MHz – 22.5792 MHz DSD
Dynamic Range 117 dB
DSD System Clock Frequency 22.5792 MHz
Signal-to-Noise Ratio 107 dB

SPDIF PLAYBACK; COAXIAL, TOSLINK (LPCM):
Frequency Range 2 Hz – 80 kHz
Signal System 16, 20, and 24 bit
Sampling Frequency 44.1 kHz to 192 kHz PCM
Dynamic Range 117 dB
System Clock Frequency 22.5792 MH
Signal-to-Noise Ratio 107 dB

MQA (Master Quality Authenticated) MQA is an award-winning British technology that delivers the sound of the  original master recording. The master MQA file is fully authenticated and is small enough to stream or download. Visit mqa.co.uk for more information. The MQA logo is a trade mark of MQA Limited. © MQA Limited 2017

MQA (Master Quality Authenticated) AiOS includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The AiOS LED glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.

About the AiOS (All-in-One-System)
AiOS is a new kind of music system for a new generation. What does that mean? Simply put, music lovers and audiophiles alike have many more choices today when it comes to how they listen to music. As a music system with 150 watts of Class AB power, AiOS combines sources and inputs designed around this new age. AiOS is also Roon Ready and fully MQA Certified, but unlike other MQA products to date, AiOS will playback any MQA sample rate up to 16x. This means despite the original sample rate of the MQA file, the MQA decoder will extrapolate the file to either a 705.6 or 768 kHz sampling rate for stunning realism and studio quality sound.  For non-MQA files, AiOS can stream or playback native PCM files up to 32 bit 384 kHz (.WAV files up to 768 kHz), plus DSD 64, 128, 256, and 512. Connect AiOS to your home network (Wi-Fi or Ethernet) and stream all of your digital music stored on your networked computer(s) or NAS drive(s) with simple plug N play UPnP, DLNA, and SMB connectivity. Also, available through your home network connection are integrated internet music streaming services, Spotify, TIDAL, vTuner, and others being added. For those that may find a home network connection too intimidating, AiOS allows you to insert a SD Card into the front SD Slot. You can also use a USB flash drive or USB hard drive loaded with digital music files directly to AiOS’ three USB-A inputs, all without a computer or network connection for direct playback! How about Bluetooth? Today, Bluetooth is ubiquitous and AiOS can certainly connect to your smartphone or tablet using the latest Qualcomm aptX© Bluetooth technology. However, AiOS has an extra trick up its sleeve. AiOS can SEND any of its selected sources to Bluetooth enabled headphones or speakers for a completely wireless music system. Place AiOS anywhere to add beauty and elegance to any room or décor and don’t fuss over unsightly wires when paired to a set of Bluetooth enabled speakers.

Speaking of beauty and elegance, AiOS is visually transformative. With the touch of a button, AiOS can change its backlit keys/buttons and center LCD display (together or individually) to six different preset colors including one custom color preset, or adjust any color as you see fit within the entire color spectrum. As if the all-aluminum gunmetal gray chassis and side panels (standard) weren’t handsome enough, AiOS offers five additional side panel color options to ensure AiOS can create the perfect blend of sight and sound to match both your lifestyle and décor choices within any setting.

Finally, AiOS includes multiple analog and digital inputs and outputs, including subwoofer output, preamplifier output, and more! Whether using AiOS as a secondary music system, or as the centerpiece of your home entertainment system, AiOS is right at home within a metropolitan condominium setting, office, bedroom, game room, dormitory, or any room or setting for the design conscience music lover.

The following section describes the AiOS basic specifications. The specifications are subject to change without notice or obligation.

Master Clock Jitter Below measurable levels
Digital Sampling Rates (Fs)  44.1 kHz to 768 kHz
Digital Filter 32-Bit 8x Oversampling Digital Filter
Digital/Analog Converters 1 – 2 channel AK4490EQ
BLUETOOTH Qualcomm aptX® decoder and transmitter
Analog Filter 3rd Order Bessel
Analog SUB Outputs Single – Ended RCA
Digital Outputs Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Inputs USB-A x 3, SD Card x 1, BLUETOOTH In & Out x1, Coaxial x1, Toslink x1
Digital Input Sample Rate USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, 128, 256 and 512., BLUETOOTH Sample Frequency (Fs) 48 kHz, 16 bit. ,Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Control Trigger output 12VDC x1, IR control x1
Communication Ethernet, Wi-Fi 802.11 b/g/n
Power Input Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption 255 Watts
Weight 15 lbs.
Dimensions 3.0″ H x 14.2″ W x 11.0″ D

POWER AMPLIFIER:
Analog Input Single-Ended RCA x 3 for Main-In, Line 1, Line 2, 3.5mm Stereo Jack x 1
Analog Input Impedance 10K Ω Unbalanced
Power Amplifier Output 2 x 75W RMS in 8 Ω from 20Hz to 20KHz, 2 x 125W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type Solid State, Power MOSFET Transistor, Class A/B
Frequency Response 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SAMPTE-1M) <0.5%
S/N Ratio >100dB, “A” Weighted
Protections Full short circuit, thermal, Ultrasonic, RF Signal muting & Current limiter.

AUDIO (LPCM):
Frequency Range 2 Hz – 22 kHz (44.1 kHz)
Amplitude Linearity 0.1 dB (20 Hz – 20 kHz)
Phase Linearity 3 degrees (20 Hz – 20 kHz)
Dynamic Range 117 dB (1 kHz)
Signal-to-Noise Ratio 107 dB (1 kHz)
Channel Separation 106 dB (1 kHz)
Total Harmonic Distortion 0.0004% (1 kHz)
Pre-Amp Output Level 3.0V RMS (220 Ω output impedance) for maximum volume

NETWORK, USB, SD CARD PLAYBACK:
Playback Format Supply .dsf, .dff (DSD64, 128, 256, 512), .aif, .aiff, .alac, .flac, .m4a, .mp4, .wav, .ape, .mp3, .aac, .wma, .ogg, .asf
Frequency Range 2 Hz – 100 kHz
Signal System 16, 20, 24, & 32 bit PCM and 1 bit DSD
Sampling Frequency 44.1 kHz to 384 kHz PCM and 2.822MHz – 22.5792 MHz DSD
Dynamic Range 117 dB
DSD System Clock Frequency 22.5792 MHz
Signal-to-Noise Ratio 107 dB

SPDIF PLAYBACK; COAXIAL, TOSLINK (LPCM):
Frequency Range 2 Hz – 80 kHz
Signal System 16, 20, and 24 bit
Sampling Frequency 44.1 kHz to 192 kHz PCM
Dynamic Range 117 dB
System Clock Frequency 22.5792 MH
Signal-to-Noise Ratio 107 dB

MQA (Master Quality Authenticated) MQA is an award-winning British technology that delivers the sound of the  original master recording. The master MQA file is fully authenticated and is small enough to stream or download. Visit mqa.co.uk for more information. The MQA logo is a trade mark of MQA Limited. © MQA Limited 2017

MQA (Master Quality Authenticated) AiOS includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The AiOS LED glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.

ABOUT THE SI-300.2D INTEGRATED AMPLIFIER
The SI-300.2d integrated amplifier is yet another milestone as Cary Audio forges deeper into the new era of sought after premium audio systems. Cary Audio is highly regarded for the rich, warm, yet detailed sound of our components. This includes both analog components and digital components, as we have become a reference standard in both. Combining Cary Audio’s analog preamplifier and power amplifier sound with our spectacular digital section is a natural evolution, and one that is stunning to both hear and see.
The SI-300.2d mates a 300 watts per channel stereo Class A/B power amplifier with analog RCA and XLR inputs to a Class A analog preamplifier gain stage. The amplifier itself is biased to run Class A for an extended portion of the power output to deliver that rich, warm, yet detailed sound Cary Audio is known for. The digital section is a chip off our reference products thereby including only the best digital circuit topology, digital to analog conversion process, and technologies like our proprietary TruBit™ Upsampling and OSO™ reclocking features. Digital inputs include; XMOS USB capable of True native DSD up to 256 and PCM/DXD up to 32 Bit / 384kHz, as well as Coaxial (2), Optical, AES/EBU, and aptX® Bluetooth inputs. What’s more, all SPDIF and Bluetooth digital sources offer 10 TruBit™ selectable upsampling or PCM to DSD conversion options. On the analog side, the SI-300.2d includes 4 analog inputs (2-balanced XLR, 2-RCA), with one each of the XLR and RCA inputs offering true Cinema Bypass features.
The powerful solid state Class AB 300 watt x 2 stereo power amplifier ensures even the most difficult of loads are tamed while delivering Cary Audio’s famous tube like sound from its solid state output devices. With the SI-300.2d the externals are also something to behold. The center mounted machined aluminum volume control is flanked by a pair of gorgeous analog “Cary Blue” VU meters to the right while the left side text display shows all source information. All this trimmed off by a handsome aluminum frame highlighting its beautiful design elements.
Additional features include: a pre/subwoofer output, coaxial and optical digital outputs, IR hand held remote, trigger out, IR sensor input, and Ethernet and Wi-Fi for controlling the SI-300.2d with free iOS and Android apps.

Τεχνικά Χαρακτηριστικά

Digital Outputs Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Input Sample Rates USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, DSD 128 and DSD 256, BLUETOOTH operating at Sample Frequency (Fs) 44.1 kHz, 16 bit
AES/EBU, Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Master Clock Jitter Below measurable levels
Digital Sampling Rates (Fs) 44.1 kHz to 768 kHz
Digital Filter 8x Oversampling Digital Filter
Digital/Analog Converters 2 channel AK4490EQ
BLUETOOTH CSR Bluetooth v 4.0 with aptX® low latency audio decoder
Analog Filter 3rd Order Bessel
Preamplifier Outputs Single – Ended RCA
Analog Input Single-Ended RCA x 2, Balanced XLR x 2
Analog Input Impedance 10 kΩ Unbalanced, 20 kΩ Balanced
Power Amplifier Outputs 2 x 300W RMS in 8 Ω from 20Hz to 20KHz, 2 x 450W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type Solid State, Class A/B
Frequency Response 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SMPTE-1M) < 0.5%
S/N Ratio >100dB, “A” Weighted
Protections Full short circuit, thermal, Ultrasonic, RF Signal muting & current limiter
Control Trigger output 12.0 VDC x 1, IR control x 1
Communication Ethernet RJ45 full remote configuration interface, Wi-Fi 802.11 b/g/n
Power Input Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption 950 Watts (4 ohm load at full output)
Finish Black powder coated matte chassis with silver or black aluminum faceplate
Weight 52 lbs
Dimensions 6.0″ H x 17.25″ W x 18.0″ D

  Πληροφορίες Χρήσεως ,

About the CAD-300SEI Integrated Amplifier:
Tube aficionados have long known that the best possible realism and detail comes when an amplifier is run in SET mode, or Single-Ended Triode. This lets one power tube handle both sides of each musical waveform, eliminating some of the most fatiguing distortions. It results in lower output power, naturally, but with high-efficiency speakers played at reasonable levels, its ultimate simplicity means the ultimate in musical naturalness.

While only offering 15 watts per channel of pure class-A remote-controlled power, the CAD-300SEI does things that almost no other amplifier today can achieve. Its careful attention to design and construction means that it is extremely quiet, allowing the tiniest musical details to float against a background of dead silence. This will help you perceive more accurate soundstaging and imaging cues, as well as the most realistic harmonic structure of each instrument. You can tell a Steinway from a Bösendorfer piano, a Stradivarius from a Guarneri or Amati violin, or a Fender from a Gibson guitar. You’ll hear inner details of musical groups that you never knew were there. Sometimes the simplest IS the best, and the CAD-300SEI is a testament to that philosophy.

The following section describes the CAD-300SEI basic specifications. The specifications are subject to change without notice or obligation.

  Τεχνικά Χαρακτηριστικά

Circuit Type Single-Ended Class A
  Power Output 15 watts
  Input Sensitivity .42 Volt for full output
  Noise and Hum -90 dB below full output
  Frequency Response 20 Hz to 23 KHz +/- .75 dB
  Inputs CD, AUX1, AUX2, Headphone jack
  Tubes 1 ea – 6SN7 Input, 2 ea – 6SN7 Driver, 2 ea – 300B Output
  Power Transformer 1 ea – EI Laminate, 200% Duty Cycle
  Output Transformer(s) 2 ea – EI Laminate Air Gap, 200% Duty Cycle
  Resistors 1% Metal Film
  Capacitors Polypropylene Film with hand soldered copper terminals (optional upgrades available)
  Power Supply Capacitors 2 ea – 1200µF@250 VDC
  AC Cord 3 Conductor, Detachable
  AC Power Requirements 117/234 VAC @ 50/60 Hz
  Consumption 107 watts – Operation
  Warm-Up Time 3 Minutes
  Break-In Time 100 hours of playing time
  Finish Anthracite black chassis with silver or black aluminum faceplate
  Weight 51 lbs, 23.13 kgr
  Dimensions 8″ H x 14″ W x 14″ D,  20.32 x 35.56  x 35.56 cm,  

Χρήσεως Πληροφορίες

About the SLI-80HS Integrated Amplifier:
For many years the SLI-80 integrated amplifier has been the standard by which all other vacuum tube integrated amplifiers are judged…period! As Cary Audio’s entry into the magic of vacuum tube music systems, it’s nothing short of stunning. Thousands of music lovers all over the world have heard and seen the virtues of this spectacular vacuum tube integrated amplifier.
The new SLI-80HS (Heritage Series) maintains the integrity of its past. Its circuit uses very little feedback which gives it incredible transparency and detail in the music while providing bass texture and impact that belies its rated power output. Solid-state rectification adds excellent pace to the music and offers improved dynamics and bass detail over earlier versions. The depth of sound and transparency will cause you to snap your head in disbelief as you look to see the musicians performing in front of you. A pair of toggle switches select either triode mode producing 40 watts per channel of pure Class A power, or ultra-linear mode which doubles power to 80 watts per channel in Class AB. If you’re listening to more subtle music and want to hear all of the inner detail and richness, select triode mode for the most lifelike imaging and tonal accuracy. Or, if you want to really let loose, switch to ultra-linear mode and enjoy the extra power and dynamics. Your choice!
For several years now, the world renown loudspeaker company, Klipsch, has been using the SLI-80 at various audio shows around the world in combination with their award-winning Heritage Series product line. From the famous Klipschorns to the Heresy III and all models in between, the combination is amazing. As a result of this collaboration, Cary Audio has partnered with Klipsch to design a version of the SLI-80 to directly complement their Heritage Series product line. Black Ash, Cherry, and Walnut wood side panels are available below as an additional accessory of the new SLI-80HS (Heritage Series) integrated amplifier to match the various finishes of the loudspeakers in the Klipsch Heritage Series. The visual effect is amazing!

Τεχνικά Χαρακτηριστικά

  Circuit Type Push-Pull Ultra-Linear Amplification Pure Class AB1
  Power Output 40 watts/channel – Triode, 80 watts/channel – Ultra-Linear
  Tube Complement 2 – 6922 Input Buffer Preamp, 2 – 6SN7 Pre-Driver/Phase Inverter, 4 – KT88 Output Tubes (or 6550, EL34, 6CA7, KT77, KT90, KT120)
  Input Sensitivity .45 volts for full output
  Input Impedance 100,000 ohms
  Noise and Hum 82dB below rated output
  Frequency Response 19Hz to 23KHz +/- .5 dB at full power output
  Output Taps 8 Ohms, 4 Ohms
  Maximum Gain 34dB
  Power Consumption 166 watts – Operation 83 watts – Standby
  Inputs 3 Pairs Single-ended RCA
  Outputs 1 Pair Speaker Posts (Switch for 4 and 8 Ohm Selectable), 1 Pair RCA for Subwoofer, ¼” Headphone
  Output Polarity Non-Inverting (any input)
  Warn-Up Time Approximately 3 minutes
  Break-In Period 100 hours of music playing time
  Finish Black Powder Coated Matte Chassis with Silver or Black Aluminum Faceplate and Knobs
  Weight 42 lbs.
  Dimensions 7″ H x 17″ W x 16″ D,

Χρήσεως Πληροφορίες

About the SLI-80HS Integrated Amplifier:
For many years the SLI-80 integrated amplifier has been the standard by which all other vacuum tube integrated amplifiers are judged…period! As Cary Audio’s entry into the magic of vacuum tube music systems, it’s nothing short of stunning. Thousands of music lovers all over the world have heard and seen the virtues of this spectacular vacuum tube integrated amplifier.
The new SLI-80HS (Heritage Series) maintains the integrity of its past. Its circuit uses very little feedback which gives it incredible transparency and detail in the music while providing bass texture and impact that belies its rated power output. Solid-state rectification adds excellent pace to the music and offers improved dynamics and bass detail over earlier versions. The depth of sound and transparency will cause you to snap your head in disbelief as you look to see the musicians performing in front of you. A pair of toggle switches select either triode mode producing 40 watts per channel of pure Class A power, or ultra-linear mode which doubles power to 80 watts per channel in Class AB. If you’re listening to more subtle music and want to hear all of the inner detail and richness, select triode mode for the most lifelike imaging and tonal accuracy. Or, if you want to really let loose, switch to ultra-linear mode and enjoy the extra power and dynamics. Your choice!
For several years now, the world renown loudspeaker company, Klipsch, has been using the SLI-80 at various audio shows around the world in combination with their award-winning Heritage Series product line. From the famous Klipschorns to the Heresy III and all models in between, the combination is amazing. As a result of this collaboration, Cary Audio has partnered with Klipsch to design a version of the SLI-80 to directly complement their Heritage Series product line. Black Ash, Cherry, and Walnut wood side panels are available below as an additional accessory of the new SLI-80HS (Heritage Series) integrated amplifier to match the various finishes of the loudspeakers in the Klipsch Heritage Series. The visual effect is amazing!

Τεχνικά Χαρακτηριστικά

  Circuit Type Push-Pull Ultra-Linear Amplification Pure Class AB1
  Power Output 40 watts/channel – Triode, 80 watts/channel – Ultra-Linear
  Tube Complement 2 – 6922 Input Buffer Preamp, 2 – 6SN7 Pre-Driver/Phase Inverter, 4 – KT88 Output Tubes (or 6550, EL34, 6CA7, KT77, KT90, KT120)
  Input Sensitivity .45 volts for full output
  Input Impedance 100,000 ohms
  Noise and Hum 82dB below rated output
  Frequency Response 19Hz to 23KHz +/- .5 dB at full power output
  Output Taps 8 Ohms, 4 Ohms
  Maximum Gain 34dB
  Power Consumption 166 watts – Operation 83 watts – Standby
  Inputs 3 Pairs Single-ended RCA
  Outputs 1 Pair Speaker Posts (Switch for 4 and 8 Ohm Selectable), 1 Pair RCA for Subwoofer, ¼” Headphone
  Output Polarity Non-Inverting (any input)
  Warn-Up Time Approximately 3 minutes
  Break-In Period 100 hours of music playing time
  Finish Black Powder Coated Matte Chassis with Silver or Black Aluminum Faceplate and Knobs
  Weight 42 lbs.
  Dimensions 7″ H x 17″ W x 16″ D

Χρήσεως Πληροφορίες

ABOUT THE SLI-100 INTEGRATED AMPLIFIER
The SLI-100 is one of the most exotic integrated stereo audio amplifiers available. Within its power range, the SLI-100 displays the operating characteristics of a true “high-end” amplifier. Careful design, parts selection and proper circuit topologies contribute to incredible reliability and enjoyment. The SLI-100 integrated stereo amplifier operates in a Class AB1 mode utilizing a negative fixed bias supply. The KT150 output tubes are configured in push-pull and yield 100 watts/channel of output power. The output transformers in the SLI-100 are the most important component in the amplifier and have been specifically designed by Cary Audio for use in the SLI-100. Negative feedback is derived from the 8 ohm tap on the output transformer secondary. This feedback circuitry is used to reduce the noise floor and improve the speaker damping characteristics. Only 4 dB of feedback is utilized. The phase inverter is a self-balancing split load configuration utilizing the 6SN7 octal base dual triode. The preamplifier circuit is a Series Regulated Push-Pull (SRPP) Class A triode voltage amplification stage direct coupled to the phase inverter. The power supply in the SLI-100 features a 200% duty cycle EI laminate power transformer.

Another feature of the SLI-100, aside from how compact and gorgeous it looks, is the delightful, sensual beauty of the music it recreates. The first thing that will strike you about the SLI-100 integrated amplifier is the incredible transparency and resolution of detail in the music. The SLI-100’s sensual nature is best revealed in the sense of life it displays in female vocalists. The SLI-100 integrated amplifier presents music with such presence and directness, you’ll be drawn into the music hour after musically satisfying hour. This is the result of circuit techniques, which eliminate any discernible crossover notch at low levels, and also contributes to the freedom from listening fatigue. The SLI-100 will draw you in even further as you realize how lucid and utterly uncolored neutrality reveals delicate nuances in the sound stage.

The SLI-100 comes standard with a removable cage cover.

The following section describes the SLI-100 basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

The following section describes the SLI-100 basic specifications. The specifications are subject to change without notice or obligation.

Circuit Type    Push-Pull Ultra-linear Amplification in Pure Class AB1
Power Output    100 watts/channel
Tube Complement    2 – 6922 Input Buffer Preamp
2 – 6SN7 Pre-Driver/Phase Inverter
4 – KT150 Output Tubes
Input Sensitivity    .45 volts for full output
Input Impedance    100,000 ohms
Noise and Hum    82db below rated output
Frequency Response    19Hz to 23Khz +/- .5db at full power output
Output Tabs    8 Ohms, 4 Ohms
Maximum Gain    34dB
Power Consumption    166 watts – Operation
83 watts – Standby
Inputs    4 Pairs Single-ended RCA
Outputs    1 Pair Speaker Posts (Switch for 4 and 8 Ohm Selectable)
1 Pair RCA for Subwoofer, ¼” Headphone
Output Polarity    Non-Inverting (any input)
Warm-Up Time    Approximately 3 minutes
Break-In Time    100 hours of music playing time
Finish    Black Powder Coated Matte Chassis with Silver or Black Aluminum Faceplate and Knobs.
Dimensions 19.8 x 43.8 x 40.7cm  Βάρος 19Kg, 7.8″ H x 17.25″ W x 16″ D Weight 42 lbs.

Χρήσεως Πληροφορίες,  Πληροφορίες Χρήσεως,

ABOUT THE SLI-100 INTEGRATED AMPLIFIER
The SLI-100 is one of the most exotic integrated stereo audio amplifiers available. Within its power range, the SLI-100 displays the operating characteristics of a true “high-end” amplifier. Careful design, parts selection and proper circuit topologies contribute to incredible reliability and enjoyment. The SLI-100 integrated stereo amplifier operates in a Class AB1 mode utilizing a negative fixed bias supply. The KT150 output tubes are configured in push-pull and yield 100 watts/channel of output power. The output transformers in the SLI-100 are the most important component in the amplifier and have been specifically designed by Cary Audio for use in the SLI-100. Negative feedback is derived from the 8 ohm tap on the output transformer secondary. This feedback circuitry is used to reduce the noise floor and improve the speaker damping characteristics. Only 4 dB of feedback is utilized. The phase inverter is a self-balancing split load configuration utilizing the 6SN7 octal base dual triode. The preamplifier circuit is a Series Regulated Push-Pull (SRPP) Class A triode voltage amplification stage direct coupled to the phase inverter. The power supply in the SLI-100 features a 200% duty cycle EI laminate power transformer.

Another feature of the SLI-100, aside from how compact and gorgeous it looks, is the delightful, sensual beauty of the music it recreates. The first thing that will strike you about the SLI-100 integrated amplifier is the incredible transparency and resolution of detail in the music. The SLI-100’s sensual nature is best revealed in the sense of life it displays in female vocalists. The SLI-100 integrated amplifier presents music with such presence and directness, you’ll be drawn into the music hour after musically satisfying hour. This is the result of circuit techniques, which eliminate any discernible crossover notch at low levels, and also contributes to the freedom from listening fatigue. The SLI-100 will draw you in even further as you realize how lucid and utterly uncolored neutrality reveals delicate nuances in the sound stage.

The SLI-100 comes standard with a removable cage cover.

The following section describes the SLI-100 basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

The following section describes the SLI-100 basic specifications. The specifications are subject to change without notice or obligation.

Circuit Type    Push-Pull Ultra-linear Amplification in Pure Class AB1
Power Output    100 watts/channel
Tube Complement    2 – 6922 Input Buffer Preamp
2 – 6SN7 Pre-Driver/Phase Inverter
4 – KT150 Output Tubes
Input Sensitivity    .45 volts for full output
Input Impedance    100,000 ohms
Noise and Hum    82db below rated output
Frequency Response    19Hz to 23Khz +/- .5db at full power output
Output Tabs    8 Ohms, 4 Ohms
Maximum Gain    34dB
Power Consumption    166 watts – Operation
83 watts – Standby
Inputs    4 Pairs Single-ended RCA
Outputs    1 Pair Speaker Posts (Switch for 4 and 8 Ohm Selectable)
1 Pair RCA for Subwoofer, ¼” Headphone
Output Polarity    Non-Inverting (any input)
Warm-Up Time    Approximately 3 minutes
Break-In Time    100 hours of music playing time
Finish    Black Powder Coated Matte Chassis with Silver or Black Aluminum Faceplate and Knobs.
Dimensions 19.8 x 43.8 x 40.7cm  Βάρος 19Kg, 7.8″ H x 17.25″ W x 16″ D Weight 42 lbs,

Χρήσεως Πληροφορίες,