Introducing the SA-500.1 ES: a powerhouse Class AB solid-state mono-block power amplifier delivering an impressive 500 watts of pure audio excellence per channel. Cary Audio’s continuing venture into solid-state technology with the SA-500.1 ES showcases innovation without bounds, promising natural sound reproduction and unmatched clarity.

Envelope yourself in a sonic experience defined by sure-footed, visceral sound, where smooth vocals and extended upper-end clarity reign supreme – a signature of Cary Audio’s legendary profile. Crafted with precision and attention to detail, the SA-500.1 ES epitomizes unparalleled build quality, elevating your audio journey with sophistication and unrivaled purity. Discover the difference Cary Audio excellence will make in your listening experience.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    1 x 500 watts @ 8 Ohms from 20Hz to 20KHz
1 x 1000 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    30K Ohms RCA-unbalanced
30K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    1 RCA, 1 XLR
Audio Output    1 pair Heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

Introducing the SA-500.1 ES: a powerhouse Class AB solid-state mono-block power amplifier delivering an impressive 500 watts of pure audio excellence per channel. Cary Audio’s continuing venture into solid-state technology with the SA-500.1 ES showcases innovation without bounds, promising natural sound reproduction and unmatched clarity.

Envelope yourself in a sonic experience defined by sure-footed, visceral sound, where smooth vocals and extended upper-end clarity reign supreme – a signature of Cary Audio’s legendary profile. Crafted with precision and attention to detail, the SA-500.1 ES epitomizes unparalleled build quality, elevating your audio journey with sophistication and unrivaled purity. Discover the difference Cary Audio excellence will make in your listening experience.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    1 x 500 watts @ 8 Ohms from 20Hz to 20KHz
1 x 1000 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    30K Ohms RCA-unbalanced
30K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    1 RCA, 1 XLR
Audio Output    1 pair Heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

The introduction of the SA-200.2 ES solid-state power amplifier represents the next generation of the SA-200.2 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.

The SA-200.2 ES is a 200 watt stereo amplifier into 8 ohms, (350 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.

When we designed the SA-200.2 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal, we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

The following section describes the SA-200.2 ES basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    2 x 200 watts @ 8 Ohms from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    22K Ohms RCA-unbalanced
22K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    2 RCA, 2 XLR
Audio Output    2 pairs of heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

The introduction of the SA-200.2 ES solid-state power amplifier represents the next generation of the SA-200.2 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.

The SA-200.2 ES is a 200 watt stereo amplifier into 8 ohms, (350 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.

When we designed the SA-200.2 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal, we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

The following section describes the SA-200.2 ES basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    2 x 200 watts @ 8 Ohms from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    22K Ohms RCA-unbalanced
22K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    2 RCA, 2 XLR
Audio Output    2 pairs of heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

ABOUT THE CAD-120S MKII AMPLIFIER
Cary Audio has almost always offered stereo tube power amplifiers, and the CAD-120S MkII is the latest in this long line of award-winning, top-rated amplifiers. The new MkII version of our most popular power amplifier features a boosted sensitivity and reduced level of global feedback, allowing it to be used with a wider variety of other preamplifiers to produce a larger soundstage with more apparent musical detail.

Fully differentially-balanced, like most Cary Audio products, the CAD-120S MkII offers both RCA single-ended and XLR balanced inputs to match any associated equipment. Front panel meters continually monitor the bias current to the tubes, helping you easily keep the amplifier operating at its peak efficiency. A huge power supply provides plenty of current storage to handle peak demands of your music. It can be switched on the fly from triode mode (Class A) at 60 watts per channel, to ultralinear mode (Class AB) at 120 watts per channel. This lets you enjoy the greatest possible minute details of your more delicate music, or ask for much more power when you want to turn it up a few notches. The CAD-120S MkII can make almost any system sound its very best in your home.

The following section describes the CAD-120S MkII basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

Circuit Type    Class AB, push-pull amplifier, Ultralinear or Triode mode operation with a front panel selector switch
Power Output    Ultralinear – 120 watts per channel
Triode – 60 watts per channel
Inputs    XLR balanced or RCA single-ended
Noise and Hum    -80 dB
Input Impedance    100K both RCA and Balanced
Frequency Response    17 Hz – 25 KHz flat @ 1 watt
Tubes    2 – 6SN7 input gain stage
2 – 6SN7 driver tubes
8 – KT 88 output tubes
Power Transformer    EI High voltage & bias supply EI laminate
Output Transformer(s)    Special bifilar wound 150 watt rating unit in each channel
Gain    28 dB
Sensitivity    1.24v
Power Supply Capacitors    4 x 560µF
Speaker Posts    Cary gold plated copper, 5-way binding
AC Cord    3 Conductor Shielded, Detachable
AC Power Requirements    117 VAC @ 50/60 Hz
234 VAC @ 50/60 Hz
Warm-Up Time    3 Minutes
Break-In Time    100 hours of playing time
Finish    Anthracite black chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    8″ H x 17 ” W x 14″ D,

Οδηγίες Χρήσεως – Πληροφορίες,