JBL Control 25-1

JBL Control 25-1, επαγγελματικό παθητικό ηχείο, 2 δρόμων με 5-¼” woofer και 3/4” PEI diaphragm tweeter. Διαθέτει ισχύς 100 Watt – 200 Watt program @ 8 ohm, απόκριση συχνότητας 60Hz-20kΗz, διασπορά 100° x 100°, ευαισθησία 90 dB, 1W/1m, προστασία υπερφόρτωσης, weather resistant. Διαστάσεις: YxΠxΒ 243x188x145 mm και βάρος 3.4kg, Τιμή τεμαχίου/ Συσκευασία ζεύγους, Εγγύηση 2 έτη Αντιπροσωπείας, Αποστολές εμπορευμάτων σε όλη την Ελλάδα, Δυνατότητα Δόσεων – Διακανονισμού,

Compact Indoor/Outdoor Background/Foreground Speaker
The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

Components: 5-¼” woofer with woven fiberglass cone 3/4” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Tεχνικά Χαρακτηριστικά:

Frequency Range (-10 dB)    60 Hz to 20 kHz
    Frequency Response (+/-3 dB)    85Hz – 17 kHz
    Power Rating    200 W Continuous Program (2 hrs)
100 W (400W peak), Continuous Pink Noise (2 hrs)
75 W (300W peak) Continuous Pink Noise (100 hrs)
    Maximum Input Voltage    25.3 V RMS (2 hrs), 50.6 V peak
    Maximum SPL    110 dB ave. Continuous Pink Noise (116 dB peak)
    Sensitivity    90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
    Coverage Angle    100° x 100°
    Directivity Factor (Q)    6.04 (averaged 1kHz – 16kHz)
    Directivity Index (DI)    7.6dB (averaged 1kHz – 16kHz)
    Nominal Impedance    8 ohms (THRU setting)
    Crossover Type    2nd order low-pass, 3rd order high-pass
    Transformer Taps    70V: 30W, 15W, 7.5W, 3.7W
100V: 30W, 15W, 7.5W
Insertion Loss <0.94 dB at any tap setting
Thru Setting: 8Ω nominal
    Recommended Protective
High-Pass    60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).
    Low Frequency Driver    135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
    High Frequency Driver    19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
    Enclosure Material    High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
    Grille    Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
    Installation    InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
    Environmental    IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
    Termination    Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
    Agency Rating    ROHS-compliant; Transformer UL Recognized per UL1876
    Colors    Black (RAL9004) or white (-WH, RAL9016)
    Dimensions (H x W x D)    243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
    Net Weight    3.4 kg (7.5 lbs)
    Shipping Weight    8.16 kg (18 lbs) for the pair-pack (for 2 speakers)
    Included Accessories    InvisiBall™ wall-mounting system), 6 mm x 100 mm hex key
    Optional Accessories    MTC-25UB-1 – Yolk-type U-bracket (&-WH)
MTC-25WMG-1 – WeatherMax grille with backing (&-WH)
MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH),