Hifi Power

McIntosh MA252

McINTOSH MA252 Integrated Amplifier, είναι ο πρώτος υβριδικός ολοκληρωμένος ενισχυτής. Λαμβάνοντας τα ρετρό σχεδιαστικά στοιχεία από το θρυλικό ενισχυτή λυχνίας McIntosh MC275, ο MA252 συνδυάζει τον καλύτερο σχεδιασμό κυκλώματος λυχνίας και ημιαγωγών για να δημιουργήσει έναν ενισχυτή ο οποίος είναι τόσο οπτικά όσο και ηχητικά εκπληκτικός. Το στάδιο προενίσχυσης του ενισχυτή χρησιμοποιεί δύο 12AX7a και δύο 12AT7 λυχνίες που προστατεύονται μέσα σε κομψούς μεταλλικούς κλωβούς. Ο αναλογικός προενισχυσης, επίσης έχει 2 εισόδους Unbalanced, 1 είσοδο Balanced και 1 είσοδο για πικάπ (Phono).  Διαθέτει επίσης έλεγχο μπάσων και πρίμων συχνοτήτων που βοηθούν να ρυθμίσετε την τονικότητα  της μουσική σας. Η βαθμίδα εξόδου είναι ένας άμεσος συζευγμένος ενισχυτής ημιαγωγών που παράγει 100 Watts ανά κανάλι σε ηχεία 8 Ohm ή 160 Watts ανά κανάλι σε ηχεία 4 Ohm.  Ο ενισχυτής  διαθέτη μια έξοδο subwoofer πλήρους φάσματος περιλαμβάνεται για χρήση με ενεργό υπογούφερ για περαιτέρω ενίσχυση των χαμηλών συχνοτήτων, ΠxYxB 30.5×19.4×45,7 cm, ΒΑΡΟΣ 12.7kg,  Εγγύηση 3 έτη Αντιπροσωπείας,  Αποστολές εμπορευμάτων σε όλη την Ελλάδα, Δυνατότητα Δόσεων – Διακανονισμού,  Παρακαλούμε επικοινωνήστε στο 2103845676 για επιβεβαίωση του αποθέματος και τιμής.  



  MA252_Side     MA252_Back

The MA252 Integrated Amplifier is the first hybrid integrated amplifier from McIntosh. Taking retro design cues from the legendary McIntosh MC275 Vacuum Tube Amplifier, the MA252 combines the best of vacuum tube and solid state circuit design to create an amplifier that’s both visually and sonically stunning.

The preamplifier stage uses two 12AX7a and two 12AT7 vacuum tubes housed inside stylish protective cages; the output stage is a direct coupled solid state amplifier that delivers 100 Watts per channel into 8 Ohm speakers or 160 Watts per channel into 4 Ohm speakers. An all analog design, it comes with 2 unbalanced, 1 balanced and 1 Moving Magnet phono input for turntables. All 4 inputs can be given user-friendly names in order to simplify user control. Bass and treble tone controls help fine tune your music to your personal preferences. A full range subwoofer output is included for use with a powered subwoofer to further enhance low frequencies.

The MA252 features our McIntosh Monogrammed Heatsinks™ which are connected to advanced high current output transistors. These transistors eliminate the typical amplifier warm-up time so that the MA252 is in peak operating condition from the moment it’s turned on. A powerful control microprocessor is used for smooth system operation, along with some of the latest audio-grade circuit components that deliver the best possible sound.

Thanks to its solid state output, the MA252 is our first product containing vacuum tubes to include our patented Power Guard® technology. Power Guard monitors the output signal for signs of overdriving and makes real time micro adjustments to the input signal to prevent harsh sounding clipping that could potentially damage your speakers. If Power Guard is activated, the 2 vacuum tubes connected to the affected audio channel(s) will flash an amber color; they will return to their normal green color when the clipping has stopped.

Other McIntosh technologies found in the MA252 include Sentry Monitor™, High Drive headphone amplifier and gold-plated speaker binding posts. Input selection, bass, treble, tone bypass, balance and input offset levels can be adjusted using the front panel knobs or the included remote control; all settings and input selection will be shown on the OLED display. The entire unit sits atop a beautiful polished stainless steel chassis with a classic McIntosh-styled die cast aluminum name badge attached to each side. Contact your local dealer to learn more.

Γενικές Πληροφορίες    Γενικές Πληροφορίες Ελληνικά 


Power Output per Channel: 100 Watts into 8 Ohms, 160 Watts into 4 Ohms
Number of Channels: 2
Speaker Impedance: 4 or 8 Ohms
Rated Power Band: 20Hz to 20kHz
Total Harmonic Distortion: 0.03%
Dynamic Headroom: 1.8dB
Frequency Response +0,-0.5dB: 20Hz to 20kHz
Frequency Response, +0, -3dB: 10Hz to 100kHz
Sensitivity Phono (Moving Coil): N/A
Sensitivity Phono (Moving Magnet): 3.0mV
Sensitivity High Level (Balanced / Unbalanced): 0.6V/0.3V
Sensitivity (Power Amp input): N/A
Signal To Noise Ratio (Moving Coil): N/A
Signal To Noise Ratio (Moving Magnet): 80dB
Signal To Noise Ratio (High Level): 97dB
Signal To Noise Ratio (Power Amp input): N/A
Input Impedance (Balanced / Unbalanced): 20K/20K
Damping Factor: 8 Ohms: >200, 4 Ohms: >100
Maximum Output (Balanced / Unbalanced): 8V Unbalanced

Balanced Input: 1
Unbalanced Input: 2
Phono Input Moving Coil: 0
Phono Input Moving Magnet: 1 (fixed loading)
Upgradeable Digital Audio Module: No
Digital Coaxial Input: 0
Digital Optical Input: 0
Digital MCT (DIN) Input: 0
Digital USB Input: 0
Balanced Variable Output:0
Unbalanced Fixed Output: 0
Unbalanced Variable Output: 0
Headphone Output: 1/4″ High Drive
Subwoofer Output: 1 (mono)
AM/FM Tuner option: No
Home Theater PassThru: No
Unbalanced Analog Connector Type: Standard
Speaker Binding Post Type: Standard
Service Port: 0

Digital Audio Specifications
Digital-to-Analog Converter (DAC) Type: N/A
Digital Coaxial Input Sample Rate: N/A
Digital Optical Input Sample Rate: N/A
Digital MCT (DIN) Input Sample Rate: N/A
Digital USB Input Sample Rate: N/A

Tone Controls: Bass and Treble
Tone Bypass and Input Assign: Yes
RS232 Control Input: No
Power Control Output: 1
Rear Panel Data Port: 1
Rear Panel IR Sensor Input: No
Input Level Match: Yes

General Specifications
Vacuum Tube or Solid State: Preamplifier: Vacuum Tube, Power Amplifier: Solid State
Output Autoformer: No
Output Meters: No
Dual Layer Chassis: Yes
Chassis Finish: Polished stainless steel
McIntosh Monogrammed Heatsinks™: Yes
Power Requirement: 120V 50/60Hz, 3.7A
Standby Power Requirement: <0.5 Watts

Weights & Dimensions
Dimensions (W x H x D): 12″ (30.5cm) x 7-5/8″ (19.4cm) x 18″ (45.7cm)
Weight: 28 lbs (12.7 kg)
Shipping Weight: 37 lbs (16.8 kg),