Easy handling
Insert the record into the barrels in the opening and press the START button. After approx. 5 minutes an acoustic signal rings out – both sides of the LP are now clean, and the record can be removed!

Fully automatic cleaning process
The VINYL CLEANER PRO X has operates fully automatically and requires no supervision. You can get on with other activities during that time.

Operational principles
In ultrasonic cleaning, a membrane makes the cleaning liquid oscillate very strongly. This creates a defined blistering of the liquid. After a short time, the bubbles implode, releasing an extremely large amount of energy – the dirt on the surface and in the grooves is literally «blasted off». At the same time, both sides of the record are cleaned by two counter-rotating microfiber barrels. These barrels, driven by counter-rotating wheels, remove the coarse dirt and move it into the cleaning liquid -out of the surface of the record.

Filtering the cleaning liquid
At start-up, the cleaning liquid is pumped into the washing chamber. After each cleaning cycle, the cleaning liquid is returned to the storage tank through a filter that collects the dirt.

Drying process
At the end of the cleaning program, the drying process takes place automatically. During this process, the record is gently air-dried by a fan and then – for removal – slightly little.

Πώς Λειτουργεί το Vinyl Cleaner Pro X – How works Vinyl Cleaner Pro X,

FURUTECH INFO

The Suppressor CF-080 allows the attenuation of mechanical resonances and isolates the connector.

It is compatible with the majority of connectors of the brand (except the FI-50), but is especially recommended for IEC where it is more efficient.

In addition, it brings an incomparable design to all sector connectors.

Furutech.com The Suppressor CF-080

The Suppressor CF-080 （AC Connector Damping Ring）
Introducing the Suppressor Carbon Fiber-Clad Stainless Steel AC Power Connector Damping Ring
Premier Performance and Legendary Build Quality,

Furutech is known the world over for a huge variety of top-quality OEM parts.
Furutech delivers consistently superior results by following Pure Transmission principles; examine every link in the power and signal path and ultimately optimize each and every element. And that especially includes damping mechanical resonances from a variety of mechanical and electrical effects.
In highly resolved audio systems everything makes a difference. The Suppressor Ring is a substantially-built silver-colored carbon fiber over nonmagnetic stainless steel damper ring with three fixing screws.
It accommodates all Furutech AC connectors except the FI-50 Piezo Ceramic series that was a Best of Innovations Award-winner for its built-in mechanical and Piezoelectric damping. If your Furutech power cores are not equipped with FI-50 AC connectors adding the Suppressor Ring is the next best thing for low distortion playback. Most effective when used on IEC connectors.

Χρήσεως Πληροφορίες,

Τεχνικά Χαρακτηριστικά:

Body: CNC Lathe stainless steel
Outer Cover Finish: Silver-Color Carbon Fiber
Fixing Screws: 3 SUS screws M3 x 3mm (L)
Dimensions: 44.5φ x 37.0 ±0.3mm (L) overall length approx.

Compatible with Furutech connector assemblies with the exception of the FI-50,

Fully Balanced Differential
Design New 3D Glass Panel Design
Exclusive McIntosh Output Autoformer&
Exclusive McIntosh Power Assurance System
Power Guard& Clipping Protection
Sentry Monitor& Current Protection
Thermal Sensors
DC Failure Protection
Turn-On Delay
Soft Start Inrush Protection
Fiber-Optic Light Diffuser Illumination
Illuminated Peak-Responding Wattmeters
Balanced Connections
Remote Power Control

Producing a minimum 400 watts per channel in stereo, 800 watts in mono, the MC402 delivers power that is fully balanced from input to speaker output. The extraordinary quad-differential design of the MC402 actually consists of four complete amplifier circuits. Each channel contains two amplifier circuits, each the mirror image of the other, whose outputs are combined in the unique McIntosh Output Autoformer® resulting in totally balanced operation from input to speaker output and the cancellation of virtually all noise and distortion. The exclusive McIntosh Output Autoformer® is a handcrafted matching device that provides an ideal impedance match for all speaker types regardless of their rated impedance. Any departure from an optimum impedance match increases stress on the amplifier which threatens a rise in distortion as well as a reduction in the life expectancy of the amplifier. McIntosh Output Autoformers® enable the MC402 to operate at maximum efficiency and to always deliver full power, without stress, to any type of louds,

Γενικές Πληροφορίες    Γενικές Πληροφορίες    Χρήσεως Πληροφορίες,

παρουσίαση Ηxoς 12 2004    παρουσίαση Highfidelity  02 2008 ,  

Τεχνικά Χαρακτηριστικά

RMS POWER OUTPUT
400W min. (stereo) or 800W min. (mono) sine wave continuous average power output from 20Hz-20,000Hz

FREQUENCY RESPONSE
20Hz to 20kHz, +0 / -0.25dB  10Hz to 100kHz, +0 / -3.0dB

TOTAL HARMONIC DISTORTION
0.005% max. at any level from  250mW to rated power output
INTERMODULATION DISTORTION
SMPTE 0.005% maximum if instantaneous peak output does not exceed twice the output rating

A-WEIGHTED SIGNAL-TO-NOISE RATIO
Unbalanced: 94dB  (120dB below rated output)
Balanced: 98dB  (124dB below rated output)

INPUT IMPEDANCE
10,000 ohms (unbalanced)
20,000 ohms (balanced)
OUTPUT LOAD IMPEDANCE
Terminals for 8, 4, or 2 ohms (stereo)
Terminals for 1, 2, or 4 ohms (mono)

INPUT SENSITIVITY
2.0V unbalanced 4.0V balanced
WIDE BAND DAMPING FACTOR Greater than 40
DYNAMIC HEADROOM 2.1dB

RATED POWER BAND 20Hz to 20kHz
POWER GUARD&
Clipping is prevented and THD does not exceed 2% with up to14dB overdrive at 1kHz

OVERALL DIMENSIONS (H X W X D) 17 1.2 (44.45 cm) x 9 7/16 (23.97 cm) x 20 (50.8 cm)

WEIGHT
110.5 lbs. (50.1kg) net 143.5 lbs. (65.1kg) boxed,

• DIGITAL OVAL CABLE  1.0m  1.0m  Τιμή 252 €
• DIGITAL OVAL CABLE  1.5m  1.0m  Τιμή 322 €
• DIGITAL OVAL CABLE  2.0m  1.0m  Τιμή 392 €,

Bi-amplified Studio Monitor with Magnetically-Shielded 5” Low Frequency Transducer and 1” Soft-Dome High Frequency Transducer and Image Control Wave Guide. Class-D 41 Watt RMS Amplifier for LF, and 41 Watt RMS Amplifier for HF. Balanced XLR and ¼” TRS Inputs with Detented Level Control, HF and LF Trim Controls.

Τεχνικά Χαρακτηριστικά

JBL ΗΧΕΙΑ
Εφαρμογή/Χρήση: STUDIO MONITOR
Μονάδα Μέτρησης: ΤΕΜ
Μήνες Εγγύησης: 24
Depth (cm): 23.1
Height (cm): 29.8
Βάρος (Kg): 4.73
Ποσότητα Παραγγελίας: 1
Power Rating Continuous Watt/Ohm: 82
High Speaker Size: 1″
Max SPL Output (dB): 108
Amplifier Design: Class D
Speaker Type: Active/Ενεργό
Κατάλογος: Επαγγελματικά
Low Speaker Size: 5″
Speaker System: Two Way
Ομάδα: Home Recording equipment
Width (cm): 18.5
Color: Black/Μαύρο,

The Analysis Plus Univeral Serial Bus (USB) 2.0 cable is rated at 480 MHz from the (USB-IF).  A fully shielded cable with a signal wire of 28 awg and power of 24 awg to avoid voltage drop. The connector pin is 30″ gold plated. A great value in a micro compact design.

• DIGITAL AUDIO CABLE 6N  0.6m  Τιμή 120 €
• DIGITAL AUDIO CABLE 6N  1.0m  Τιμή 140 €,

SAEC Hyper Digital Cable HDI-6N. High quality RCA Digital cable available at your choice in the 0.6 and 1.0 meters versions.
HDI-6N is an epoch-making digital cable equipped with “Hyper Digital Isolator” to eliminate the Common-mode noise perfectly.
Hyper Digital Isolator converts electrical signal to magnetic signal at the 1st(input) stage and converts the magnetic signal to electrical signal again at the 2nd(output) stage to isolate electrical connection between input and output, so that the common-mode noise is perfectly disconnected and consequently, a very clean signal without any noise is transmitted.
The Isolator is designed to minimize the Electrostatic connection and to realize a lowest transmission loss of below 0.9dB which create a superior sound quality.
Another important feature is to realize the Impedance Matching which is a very important factor of digital signal transmission,

• DIGITAL AUDIO CABLE 6N  0.6m  Τιμή  62 €
• DIGITAL AUDIO CABLE 6N  1.2m  Τιμή  90 €
• DIGITAL AUDIO CABLE 6N  1.8m  Τιμή 115 €,

Differential Input Discrete Pre-amplifier Circuit
A discrete circuit design is employed for pre-amplifier section, to deliver a detailed yet abundantly musical quality. Your room will be filled with natural and powerful sound.

FET Differential Input 3-stage Pure Complimental Discrete Power Amplifier Circuit
The power amplifier section employs a Differential Input 3-stage Pure Complimental Discrete circuit with FET (Field Effect Transistor). The circuit design has an optimised layout to minimize interference and signal loss as it travels through the circuit board.

Mic input with mixing function
DR-22WL
A mic input on the front panel allows users to stage Karaoke sessions by mix singing voices from a mic input with music from a selected input source. The A-R650MKII also helps users to record their Karaoke performances by sending the blended sound out to an external recording device such as AD-RW900 or CD-RW890.

Auxiliary AC Output
DR-22WL
The A-R650MKII also features a switched auxiliary AC output on rear panel (up to 100w), so users can connect a CD Player or component, minimising the number of plugs required.

Features at a glance
120W + 120W Output Power
Differential input discrete amplifier
FET differential input three-stage pure complementary discrete power amplifier
Microphone input jack with Mic Mixing capability
Two selectable speaker channels (Speakers A and B)
Built-in phono-equaliser amplifier (MM type)
Interconnection with iPod-compatible CD-P650 CD player
Remote-controllable motor-driven volume control
Balance, Tone Control (Bass, Treble), Loudness
Source Direct
TAPE2 Monitor
Auxiliary AC Power Outlet (Switched, Max 100W)
Gold-plated RCA terminals on Rear Panel
Headphone Jack

Τεχνικά Χαρακτηριστικά

Amplifier section    
Rated Output Power    120W + 120W (4 ohms, 1kHz, T.H.D. 0.5%)
90W + 90W (8 ohms, 1kHz, T.H.D. 0.5%)
Total Harmonic Distortion    0.02% (8 ohms, 1kHz, 45W)
Supported Speaker Impedance    
Speaker A or B    4 to 16 ohms
Speaker A + B    8 to 16 ohms
Frequency Response    
Overall    10 to 65k Hz
Phono    20 to 20k Hz (+/-1dB RIAA)
Line    5 to 80k Hz (Source Direct, 1W)
S/N Ratio (Input Short)    
Phono    65dB
Line    90dB
Tone Control    
BASS    +/-10dB (100Hz)
TREBLE    +/-10dB (100Hz)
Muting    -20dB
Audio Inputs/Outputs    
Line Input    
Connector    ×6(RCA, Gold-plated)
Input Level    180mV
Impedance    47k ohms
Phono Input    
Connector    ×1(RCA, Gold-plated)
Input Level    2.8mV
Impedance    47k ohms
Line Output    
Connector    ×2(RCA, Gold-plated)
Input Level (TAPE/CD-R)    150mV
Impedance (TAPE/CD-R)    3.3k ohms
Mic Input    
Connector    1/4″ (6.3mm) Monaural Jack
Phone Out    
Connector    1/4″ (6.3mm) Stereo Jack
Speaker Terminals    A, B (Binding-post)
Auxiliary Power Outlet    Euro Socket ×1(Max 100W)
Power    
UK/Europe    AC230V 50Hz
Power Consumption    300W (0.5W at standby mode)
Dimensions    435(W) × 142(H) × 355(D) mm / 17.1″(W) × 5.6″(H) × 14.0″(D)
Weight    9.2Kg, 20.3lbs
Accessories    Remote Control (UR-1314), AAA Batteries × 2, Owner’s Manual (including Warranty Card),

Τεχνικά Χαρακτηριστικά

Τύπος  Over Ear

Απόκριση Συχνότητας      10 – 20000 Hz

Αντίσταση   -

Ευαισθησία  99 dB

Διάμετρος Κάψας   40 mm

Συνδεσιμότητα  Ενσύρματες Συνδέσεις  3.5mm

Τύπος Σύνδεσης  Ενσύρματα

Μικρόφωνο  Ναι

Volume Control  Όχι

Αποσπώμενο Καλώδιο   Ναι

Αναδιπλούμενες Κάψες   Ναι

Περιστρεφόμενες Κάψες   Όχι

Card Reader   -

Ραδιόφωνο  -

Noise Cancellation   Δε διαθέτει

Smart Assistant  -