ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

Upgrade your sound with the AV32 monitor speakers from M-Audio.
The acoustically-inert MDF cabinets eliminate clarity-robbing resonances. Onboard amplification provides 10 Watts of power per channel. The two-way design features an optimized bass reflex design and OptImage IV waveguides to deliver extended bass and crystal-clear highs.
Offering both a 1/8-inch stereo jack and RCA inputs, the AV32 speakers are compatible with all your gear, including your tablet, computer, or mobile device. The convenient headphone output allows you to work privately at any hour. Ideal for producing all kinds of media, the AV32 monitors are also perfect for gaming, watching videos, and listening to music. Cables are included.

3-inch polypropylene-coated woofers for tight, accurate bass
1-inch ferrofluid-cooled silk cone tweeters for clear, pristine highs
OptImage IV tweeter wave guides for superior imaging and detail
10-watt per channel amplifier
RCA inputs for connecting gaming systems, DJ gear, mixers, and more
Front-panel 1/8-inch stereo auxiliary input for connecting your laptop or desktop computer, MP3 player, or other audio sources
Front-panel 1/8-inch headphone output
Front-panel volume control
Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound
Attractive black vinyl laminate finish

Τεχνικά Χαρακτηριστικά:

  Type: Two-way desktop reference speaker
  Low-Frequency Driver: 3″ diameter, polypropylene-coated, with high-temperature voice coil
  High-Frequency Driver: 1″ diameter, silk cone tweeter
  Frequency Response: 80 Hz – 20 kHz
  Crossover Frequency: 3.3 kHz
  RMS SPL: 101.5 dB @ 1 meter
  Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)
  Input Connectors: Left and right RCA line input and 1/8″ aux input
  Polarity: Positive signal at «+» input produces outward low-frequency cone displacement
  Dynamic Power: 10 watts continuous, per channel into 4 Ω
  Input Impedance: 10 k Ω unbalanced
  Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
  Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
  Indicator: Blue power LED for aligning wave guide
  Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via detachable 2-conductor line cord
  Cabinet: Vinyl-laminated MDF
  Dimensions: 7.5″ x 5.1″ x 6.1″ (19 cm x 13 cm x 15.6 cm)
  Weight: 5.6 lbs (2.55 kg)

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.

Bi-amplified design with 70 watts of distributed power for cohesive, accurate sound
5” low-frequency drivers with Kevlar cones for rich, defined lows
1” high-frequency drivers with natural silk domes and integrated waveguides for smooth, clear highs
Optimized rear ports for extended low-frequency response
Magnetic shielding eliminates interference with other electronic equipment
XLR balanced and 1/4” balanced/unbalanced inputs for connecting mixers, amplifiers, instruments, DJ gear, and more
Volume control
Includes two isolation pads

Τεχνικά Χαρακτηριστικά:

  Frequency Response: 56Hz-22kHz
  Crossover Frequency: 3 kHz
  Low-Frequency Amplifier Power: 40 watts
  High-Frequency Amplifier Power: 30 watts
  Maximum Signal-To-Noise (Dynamic Range): > 100 dB (typical A-weighted)
  Polarity: Positive signal at + input produce outward LF cone displacement
  Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
  Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
  Power: Factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
  Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mainsfuse
  Cabinet: Vinyl-laminated MDF
  Size: 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
  Weight: 11 lbs./unit; 5 kg.

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

Upgrade your sound with the AV42 monitor speakers from M-Audio.
The acoustically-inert MDF cabinets eliminate clarity-robbing resonances. Inside, Class A/B amplification provides 20 Watts of power per channel. The two-way design features an optimized bass reflex design and OptImage IV waveguides to deliver extended bass and crystal-clear highs.
Offering rear-panel RCA inputs, the AV42 speakers are compatible with all your gear. There is even a 1/8-inch aux input for your tablet, computer, or mobile device. The convenient headphone output allows you to work privately at any hour. Ideal for producing all kinds of media, the AV42 monitor speakers are also perfect for gaming, watching videos, and listening to music. Cables are included.

4-inch polypropylene-coated woofers for tight, accurate bass
1-inch ferrofluid-cooled silk cone tweeters for clear, pristine highs
OptImage IV tweeter wave guides for superior imaging and detail
20-watt per channel amplifier with Class A/B architecture
RCA inputs for connecting gaming systems, DJ gear, mixers, and more
Front-panel 1/8-inch stereo auxiliary input for connecting your laptop or desktop computer, MP3 player, or other audio sources
Front-panel 1/8-inch headphone output
Front-panel volume control
Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound
Attractive black vinyl laminate fin

Τεχνικα Χαρακτηριστικά:

  Type: Two-way desktop reference speaker
  Low-Frequency Driver: 4″ diameter, polypropylene-coated, with high-temperature voice coil
  High-Frequency Driver: 1″ diameter, silk cone tweeter
  Frequency Response: 75 Hz – 20 kHz
  Crossover Frequency: 2.7 kHz
  RMS SPL: 101.5 dB @ 1 meter
  Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)
  Input Connectors: Left and right RCA line input, and 1/8″ aux input
  Polarity: Positive signal at «+» input produces outward low-frequency cone displacement
  Dynamic Power: 20 watts continuous, per channel into 4 Ω
  Input Impedance: 10 k Ω unbalanced
  Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
  Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
  Indicator: blue power LED for aligning wave guide
  Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via detachable 2-conductor line cord
  Cabinet: Vinyl-laminated MDF
  Dimensions: 8.4″ x 5.7″ x 7.4 (21.3 cm x 14.6 cm x 18.8 cm)
  Weight: 7.6 lbs (3.43 kg)

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

The BX5 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5” woven Kevlar low-frequency driver and 1” natural silk dome tweeter, the BX5 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design. The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease.  With the BX5 Carbon, your music is ready for any listening environment.

Τεχνικά Χαρακτηριστικά:

  Type: 2-way near-field studio reference monitors
  LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
  HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
  Frequency Response: 56 Hz – 22 kHz
  Crossover Frequency: 2.8 kHz
  LF Amplifier Power: 40 W
  HF Amplifier Power: 30 W
  Signal-to-Noise Ratio: 100 dB typical A-weighted
  Input Connectors: 1 x XLR balanced input connector, 1 x TRS balanced/unbalanced input connector
  Polarity: Positive signal at + input produce outward LF cone displacement
  Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
  Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
  Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains  fuse.
  Indicator: Power on/off indicator on rear panel
  Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
  Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  Dimension (height x width x depth): 9.8″ x 6.9″ x 7.9″, 250 mm x 176 mm x 200 mm
  Weight (without packing): 11 lbs., 5.0 kg

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

The BX6 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 6” woven Kevlar low-frequency driver and 1.25” natural silk dome tweeter, the BX6 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design. The bi-amplified 100 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease.  With the BX6 Carbon, your music is ready for any listening environment,

Τεχνικά Χαρακτηριστικά:

Type: 2-way near-field studio reference monitors
LF Driver: 6-inch (153mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded.
HF Driver: 1.25-inch (32mm) magnetically shielded natural silk dome
Frequency Response: 45 Hz – 22 kHz
Crossover Frequency: 2.5 kHz
LF Amplifier Power: 70 W
HF Amplifier Power: 60 W
Signal-to-Noise Ratio: 100 dB typical A-weighted
Input Connectors: 1 x XLR balanced input connector, 1 x TRS balanced/unbalanced input connector
Polarity: Positive signal at + input produce outward LF cone displacement
Input Impedance: 20 KO balanced, 10 KO unbalanced
Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse.
Indicator: Power on/off indicator on rear panel
Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
Dimension (height x width x depth): 12.5”x 8.4” x 9.8” (318mm x 213mm x 249mm)
Weight (without packing): 16 lbs, 7.5 kg

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

The BX8 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8” woven Kevlar low-frequency driver and 1.25” natural silk dome tweeter, the BX8 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic, professional mixing. The bi-amplified 130 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease.  With the BX8 Carbon, your music is ready for any listening environment.

Τεχνικά Χαρακτηριστικά:

  Type: 2-way near-field studio reference monitors
  LF Driver: 8-inch (203 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround, magnetically shielded
  HF Driver: 1.25-inch (32mm) magnetically shielded natural silk dome
  Frequency Response: 38 Hz – 22 kHz
  Crossover Frequency: 2.2 kHz
  LF Amplifier: Power 70 W
  HF Amplifier: Power 60 W
  Signal-to-Noise Ratio: > 100 dB typical A-weighted
  Input Connectors: 1 x XLR balanced input connector, TRS balanced/unbalanced input connector
  Polarity: Positive signal at + input produce outward LF cone displacement
  Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
  Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meterwith volume control at maximum
  Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse.
  Indicator: Power on/off indicator on rear panel
  Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or100 V ~50/60 Hz
  Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  Dimension: (height x width x depth): 15″ x 10″ x 12″, 381 mm x 254 mm x 305 mm
  Weight (without packing): 26.4 lbs., 12 kg

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

A well-designed three-way monitor using high quality drive units exhibits really outstanding performance:

1. It plays louder. A midrange driver is typically four to five inches in diameter, meaning that the midrange driver can “move a lot more air” through the mid frequencies than a diminutive 1” tweeter. For the same wattage input, a five-inch midrange driver literally takes a “bigger bite” out of the air, which translates into more sound for the same input power.

2. It handles great amounts of power and is extremely reliable. Having a dedicated midrange driver means that the tweeter—which is the most fragile of speaker elements—does not have to struggle trying to reach down to the midrange frequencies, as tweeters must do in two-way systems. The crossover frequency specs tell the story: In a properly designed three-way speaker, the tweeter doesn’t have to “enter the game” until around 4,000 Hz—well up into the treble region, which is not a frequency area that requires the current-heavy drive signals that can burn out a delicate tweeter. In contrast, the tweeter in a two-way speaker crosses over about a full octave lower—around 2,000 Hz—which puts it in considerably greater thermal and mechanical danger. The lower a tweeter crosses over, the more likely it is that you’ll suffer tweeter failure from burnout or irreparable voice coil displacement from over-excursion.

3. The sound coverage (sometimes called “dispersion” or “radiation pattern”) is extremely wide and consistent. This is critically important in a studio monitor—you have to have wide, even, consistent sound coverage so you can hear your mixes with clarity and detail, even if you’re standing a little off to the side (“off axis”) of the speaker. The M3-6 uses its drivers only in the frequency range where it has very wide-angle dispersion.

Best of all, the space-saving M3-6 Studio Reference Monitor delivers its truly spectacular three-way sound from the same compact cabinet size as a standard two-way monitor.

Τεχνικά Χαρακτηριστικά:

  Real wood baffle, optimized internal bracing
  Inline mid- & high-frequency drivers offer superior imaging
  6″ woven Kevlar low-frequency driver, 5” woven Kevlar mid-frequency driver, 1” silk dome tweeter with integrated waveguide
  Tri-amp Class A/B power, 160 Watts total
  XLR and 1/4″ balanced inputs, RCA unbalanced input
  3-band EQ with bypass, switchable low-cut filter
  Rear-mounted volume and power control
  Frequency response: 40 Hz – 22 kHz
  Crossover frequency:  Low-Mid: 400 Hz, Mid-High: 4 kHz
  Amplifier Power: Low-frequency amplifier power: 110 W,  Mid-frequency amplifier power: 30 W, High-frequency amplifier   power: 20 W, LF cutoff switch: flat, 80 Hz, 100 Hz
  Equalizer Controls: LF: ± 6 dB boost/cut at 100 Hz, MF: ± 6 dB boost/cut at 1 kHz, HF: ± 6 dB boost/cut at 10 kHz, Bypass switch
  Polarity: Positive signal at + input produces outward LF cone displacement
  Input impedance: 20 k O balanced, 10 k O unbalanced
  Input sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
  Protection: Output current limiting; over-temperature; transient on/off protection to prevent speaker «pops»; subsonic filter;  external mains fuse
  Cabinet: Wood veneer front baffle with vinyl-laminated cabinet
  Size (W x H x D): 9.25″ x 15″ x 9.06″, 235 mm x 381 mm x 230 mm
  Weight: 23.15 lbs. 10.5 kg

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

A well-designed three-way monitor using high quality drive units exhibits really outstanding performance:

1. It plays louder. A midrange driver is typically four to five inches in diameter, meaning that the midrange driver can “move a lot more air” through the mid frequencies than a diminutive 1” tweeter. For the same wattage input, a five-inch midrange driver literally takes a “bigger bite” out of the air, which translates into more sound for the same input power.

2. It handles great amounts of power and is extremely reliable. Having a dedicated midrange driver means that the tweeter—which is the most fragile of speaker elements—does not have to struggle trying to reach down to the midrange frequencies, as tweeters must do in two-way systems. The crossover frequency specs tell the story: In a properly designed three-way speaker, the tweeter doesn’t have to “enter the game” until around 4,000 Hz—well up into the treble region, which is not a frequency area that requires the current-heavy drive signals that can burn out a delicate tweeter. In contrast, the tweeter in a two-way speaker crosses over about a full octave lower—around 2,000 Hz—which puts it in considerably greater thermal and mechanical danger. The lower a tweeter crosses over, the more likely it is that you’ll suffer tweeter failure from burnout or irreparable voice coil displacement from over-excursion.

3. The sound coverage (sometimes called “dispersion” or “radiation pattern”) is extremely wide and consistent. This is critically important in a studio monitor—you have to have wide, even, consistent sound coverage so you can hear your mixes with clarity and detail, even if you’re standing a little off to the side (“off axis”) of the speaker. The M3-8 uses its drivers only in the frequency range it has very wide-angle dispersion.

Best of all, the space-saving M3-8 Studio Reference Monitor delivers its truly spectacular three-way sound from the same compact cabinet size as a standard two-way monitor.

Τεχνικά Χαρακτηριστικά:

  Real wood baffle; optimized internal bracing
  Inline mid- & high-frequency drivers offer superior imaging
  8″ woven Kevlar low-frequency driver, 5” woven Kevlar mid-frequency driver, 1” silk dome tweeter with integrated waveguide
  Tri-amp Class A/B power, 220 Watts total
  XLR and 1/4″ balanced inputs; RCA unbalanced input
  3-band EQ with bypass; switchable low-cut filter
  Rear-mounted volume and power control
  Frequency response: 38 Hz – 22 kHz
  Crossover frequency: Low-Mid: 450 Hz, Mid-High: 3.9 kHz
  Amplifier Power: Low-frequency amplifier power: 150 W, Mid-frequency amplifier power: 35 W, High-frequency amplifier   power: 35 W
  LF cutoff switch: flat, 60 Hz, 80 Hz
  Equalizer Controls: LF: ± 6 dB boost/cut at 100 Hz, MF: ± 6 dB boost/cut at 1 kHz, HF: ± 6 dB boost/cut at 10 kHz, Bypass switch
  Polarity: Positive signal at + input produces outward LF cone displacement
  Input impedance: 20 k Ω balanced, 10 k Ω unbalanced
  Input sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
  Protection: Output current limiting; over-temperature; transient on/off protection to prevent speaker «pops»; subsonic filter; external mains fuse
  Cabinet: Wood veneer front baffle with vinyl-laminated cabinet
  Size (W x H x D): 10.6″ x 17.1″ x 11.2″; 268 mm x 434 mm x 285 mm
  Weight: 28.2 lbs.; 12.8 kg

ΕΓΓΥΗΣΗ 2 ΕΤΗ ΕΠΙΣΗΜΟΥ ΑΝΤΙΠΡΟΣΩΠΟΥ,

The BX Subwoofer delivers deep, accurate bass response down to the lowest audible frequencies, picking up where your left/right studio monitors leave off. Recording professionals know that hearing the extreme low frequencies in music is essential for making accurate mixing adjustments and producing the best recordings. The BX Subwoofer easily fulfills this requirement in a powerful and compact package that won’t take up too much of your valuable studio space.

The BX Subwoofer’s frequency response extends down to 20Hz (-3 dB), the lowest audible frequency. It uses the highest-quality components for no-compromise performance: a 10” fiberglass/paper composite driver with an oversized magnet and high-temperature 2” voice coil, powered by a 240-watt Class AB all-discrete internal amplifier with a variable 50-200 Hz crossover. The cabinet is constructed of resonant-free ¾” Medium Density Fiberboard (MDF) with 1” front and rear baffles, and is heavily braced to eliminate the extraneous cabinet vibrations that can rob a subwoofer of its impact and articulation.

10” long-excursion low-frequency driver with oversized magnet
240-watt Class A/B amplifier with all-discrete transistor design
Stereo inputs: XLR 1/4″ balanced/unbalanced RCA
Stereo satellite outputs: XLR; 1/4″ balanced/unbalanced
Internal crossover offers variable frequency
Included subwoofer bypass footswitch
High-density bass reflex cabinet with internal bracing
Removable grill and detachable feet
180 phase reverse switch

Τεχνικά Χαρακτηριστικά:

  Type: Bass-reflex active powered subwoofer
  Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber  surround
  Frequency Response: 20-200Hz (-3dB)
  Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
  Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
  Adjustable Gain: (-30dB to +6dB)
  Amplifier: 240 watts average power into 4, discrete transistor design
  Signal-To-Noise Ratio: 96dB (A-weighted)
  THD at Rated Power, Mono Mode: 0.019%
  Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
  Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
  Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
  Input Impedance: 20k ohms balanced, 10k ohms unbalanced
  Maximum Input Level: +20dBU
  Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current  protection
  Indicator: Power on (blue) or standby/bypass (red)
  Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz powered via detachable grounded IEC cable
  Cabinet: Vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
  Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
  Shipping Weight: 54.6 lbs.; 24.75 kg

Για την καλύτερη ενημέρωση σας και εξυπηρέτηση παρακαλούμε επικοινωνήστε μαζί μας στα τηλέφωνα 210 3845272 και 210 3845676 για προιόντα και τιμές που δεν αναφέρονται ή επισκεφθείτε μας ξανά για περισσότερα νέα προϊόντα και υπηρεσίες.

Επίσης με χαρά θα θέλαμε να μας δώσετε (στείλετε) τη γνώμη σας και τις υποδείξεις σας στο

e-mail : sales@hifipower.gr.

Ευχαριστούμε για την βοήθεια και την κατανόηση,