A modern home audio system for modern lifestyles

Turntable, preamplifier and amplifier all in one
Includes Bluetooth® and auxiliary inputs
Just add your music and speakers,

Turntable? ✔
Amplifier? ✔
Vacuum tube preamplifier? ✔
Phono preamplifier? ✔
Analog input? ✔
Digital inputs? ✔
Bluetooth® receiver? ✔
Speaker outputs? ✔
Subwoofer output? ✔
Headphone jack? ✔
McIntosh engineering? ✔
What else do I need? Just add your music and speakers.

REVIEWS & AWARDS

McIntosh MTI100 Integrated Turntable Top High End Award
TOP HIGH END Award
2019 Hi-Fi & High End

Show (Russia)
At first glance, the McIntosh MTI100 Integrated Turntable may look like it’s just a turntable, but a closer look will reveal that it is in fact so much more. Truly a one-of-a-kind product, it is designed for those who want maximum flexibility in their home audio system but don’t want – or don’t have the space for – a large audio system in their home. With all the built-in connectivity the MTI100 offers, it can become the center piece of a modern home audio system for modern lifestyles. Simply add your favorite speakers of choice (such as our XR50 bookshelf or XR100 floorstanding speakers) and you’ll have a complete and comprehensive audio system.

Besides the turntable that plays both 33-1/3 and 45 rpm vinyl records, the MTI100 also includes a power amplifier, a vacuum tube preamplifier section, a shielded phono preamplifier, an unbalanced auxiliary input, digital audio coaxial and optical inputs, a Bluetooth receiver, a subwoofer output, stereo speaker outputs for sharing your music with friends, and a headphone jack for personal listening.

The MTI100 «oozes class and luxury…» no other product Brockhouse has reviewed «elicited more oohs and ahs than the MTI100…» its «big, spacious sound» made «listening to music an event.» – SoundStage.

TOP HIGH END Awa

Τεχνικά Χαρακτηριστικά

CARTRIDGE SPECIFICATIONS
Cartridge Type Moving Magnet
Output Level 4mV at 1kHz
Load Impedance 47k Ohms
Frequency Response 12Hz to 30kHz
Channel Separation 30dB at 1kHz
Compliance 12 x 10-6 cm/dyne
Recommended Tracking Force 2.0 g
Channel Difference Less than 1dB at 1kHz
Total Mass 6.5 g
Stylus Elliptical
Cantilever Material Aluminum
TONEARM SPECIFICATIONS
Bearing Lateral type bearing
Arm Tube Damped machined aluminum
Counterweight Concentric
Adjustments None
TURNTABLE SPECIFICATIONS
Playback Speeds 33-1/3 and 45 rpm
Motor Type Permanent magnet AC synchronous
Speed Control Manual speed change via a 2 speed pulley
Platter Aluminum
Platter Bearing Oil bath bearing with a high performance polyetheretherketone (PEEK) thrust disc and machined graphite impregnated brass bushings
Signal To Noise Ratio 35dB – 40dB
Wow & Flutter 0.1%
CONNECTIVITY Stereo Outputs Unbalanced 1 (bridged to AMP IN)
Stereo Inputs Unbalanced 1
Digital Coaxial Input 1
Digital Optical Input 1
Subwoofer Output 1
Wireless Input High Definition Bluetooth 4.2
CONTROL
Power Control Output 1
Platter Light N/A
Speed Control Fine Adjustment No
ELECTRONIC SPECIFICATIONS
Power Output per Channel
50 Watts into 8 Ohms
80 Watts into 4 Ohms
Number of Channels 2
Speaker Impedance 4 or 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.5% (Amplifier) 0.2% (Preamplifier)
Dynamic Headroom 1.0dB (8 Ohms) 1.3dB (4 Ohms)
Frequency Response +0,-0.7dB 20Hz to 20kHz
Signal To Noise Ratio (Moving Magnet) 75dB
Signal To Noise Ratio (High Level) 90dB
Damping Factor 8 Ohms: >200 4 Ohms: >100
Maximum Output (Balanced / Unbalanced) 9V Unbalanced
GENERAL SPECIFICATIONS Dust Cover Included No
WEIGHTS & DIMENSIONS Dimensions (W x H x D)
19-1/4” (48.9cm) x 6-3/4” (17.15cm) x 14” (35.6cm)
Weight 33.5 lbs (15.2 kg),

MHA200
2-Channel Vacuum Tube Headphone Amplifier
Compact footprint: just 6-1/8″ (15.6cm) x 9-1/8″ (23.2cm)
4 selectable headphone impedance ranges
Balanced and unbalanced analog inputs
Balanced stereo or dedicated Left & Right outputs
3 Year Limited Warranty

Treat Your Headphones to McIntosh Vacuum Tube Amplification.
The MHA200 Vacuum Tube Headphone Amplifier is designed for discerning headphone enthusiasts who demand the most from their headphones. Its versatile set of connectivity options, including balanced inputs and outputs, allows for nearly all headphone types to be connected to enjoy an extraordinary personal listening experience.

A pair of 12AT7 and 12BH7A dual triode vacuum tubes power the compact MHA200. The 12AT7 vacuum tubes amplify the incoming audio signal while the 12BH7A tubes provide the power to drive the output to your headphones with low distortion. The MHA200 uses a pair of our Unity Coupled Circuit output transformers to deliver pristine audio to your ears. Our Unity Coupled Circuit is the same technology McIntosh was founded on in 1949 and is still used in our vaunted full-size home audio vacuum tube amplifiers such as the timeless MC275 and the more recent MC1502. Indeed, the MHA200 shares many physical design traits with the aforementioned vacuum tube amplifiers.

«An utterly captivating piece of kit that is likely to last decades and keep delighting you all the way through.» Received Editor’s Choice Award for Best High-End Hi-Fi Product 2022. – AVForums

A wide assortment of connectivity options come on the MHA200. For attaching your headphones, there are 3 options: a pair of 3-pin balanced XLR connectors for dedicated Left and Right balanced output; a 4-pin balanced XLR connector for balanced stereo output; and a 1/4″ stereo headphone jack.

«Regardless of the headphones we use, this little box turns in a lovely, lush sounding performance that’s hard to dislike. It sounds smooth but far from lifeless, delivering high levels of detail in a cohesive and musical manner… If you’re looking for a top-class headphone amplifier, there are few we’ve heard at this price that are as capable or as charming as this one.» – What Hi-Fi

For connecting the MHA200 to your home music system’s source components, it has 1 set each of both balanced and unbalanced inputs. Thanks to the MHA200’s small size of just 6-1/8″ (15.6cm) wide x 9-1/8″ (23.2cm) deep and its balanced inputs, it can be placed close to your listening position for ease use, with long balanced audio cables connecting it to your audio system without fear of signal loss.

The MHA200 takes advantage of unique McIntosh technologies to create the best possible personal listening experience. The Unity Coupled Circuit transformers have been adapted to produce 4 headphone impedance ranges of 32 – 100, 100 – 250, 250 – 600, and 600 – 1,000 Ohms at 500mW so that virtually every headphone can receive legendary McIntosh sound quality and performance.

«The MHA200 is a hell of a headphone amplifier.» It «will impress, entertain and impress again indefinitely.» With the MHA200 «you can enjoy as good a headphone experience as is currently available.» Named Headphone Amplifier of The Year 2021. – HiFi+

«The McIntosh MHA200 Tube Headphone Amplifier is a contender for the best tube headphone amp manufactured to date, and easily outperforms more complex and unnecessarily feature-encumbered designs loaded with unnecessary additional tubes… It has ZERO musical flaws to report and is nearly perfect in execution.» Highly recommended. – Positive Feedback

We custom designed and manufactured the output transformers to match the tube amplifier section to the headphone output section in order to ensure maximum power transfer for various headphone loads. Instead of having to adapt to the impedance of the headphones with voltage gain in the input stage, the Unity Coupled Circuit output transformers” secondary windings ensure the full power of the MHA200 is available regardless of the impedance of your headphones. A custom, high-performance, and highly efficient toroidal power transformer with low mechanical hum and a low magnetic field, which helps reduce electrical noise, provides clean power to the amplifier.

Reveals «the true nature of every headphone, without adding anything of its own. And it does so with power and punch but without sacrificing on the subtlety or micro dynamics. It allows the soundstage to breathe and come to life in an almost three-dimensional way inside your head.» – What Hi-Fi Sound and Vision (India)

You can select the best impedance range for your headphones via the LOAD knob. The VOLUME knob allows the MHA200 to be connected directly to music sources that only have a fixed volume output without needing a preamplifier for volume control. Conversely, if you’re using a component with variable volume output, then the VOLUME knob should be set to the center Unity Gain point and the volume controlled by the variable output component.

«The MHA200 is endlessly enjoyable with a rich, balanced and powerful sound, that’s is more forgiving than most rivals. Add to this the stellar build quality and ability to cater for a wide range of headphones and connections and the MHA200 is a benchmark product that’s highly recommended.» – Audiograde

The MHA200 features a custom formed stainless steel chassis with a polished mirror finish that will accentuate the glow of the vacuum tubes, making it a statement piece to display in your home and to use with pride. A vintage die cast aluminum McIntosh name badge adorns the side of the MHA200. A Power Control input and output allows the MHA200 to turn on and off with other connected McIntosh components, such as preamplifiers, CD players, turntables, or media steamers. A protective vacuum tube cover is included. Contact your local dealer to learn more.

Τεχνικά Χαρακτηριστικά

HEADPHONE OUTPUT SPECIFICATIONS
Headphone Power Output 500mW
Headphone Output Impedance
32-100 Ohms
100-250 Ohms
250-600 Ohms
600-1,000 Ohms
ELECTRONIC SPECIFICATIONS
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.5% maximum harmonic distortion at any power level from 250 milliwatts to rated power, 20Hz to 20,000Hz <0.20% at 1W, 20Hz to 20,000Hz
Intermodulation Distortion 0.04% Typical0.4% Maximum
Dynamic Headroom 1.5dB
Frequency Response +0, -0.5dB from 20Hz to 20,000Hz
Sensitivity (Unbalanced) 1.0 Vrms
Sensitivity (Balanced) 2.0 Vrms
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio 94dB
Input Impedance (Balanced / Unbalanced) 20K/10K
Damping Factor >150
Preamplifier Output\  N/A
Preamplifier Output Impedance N/A
Voltage Gain
12dB at 32 Ohms
17dB at 100 Ohms
21dB at 250 Ohms
25dB at 600 Ohms
Power Guard No
CONNECTIVITY
Headphone Output
One pair of 3-pin balanced XLR connectors for dedicated Left and Right balanced output;
One 4-pin balanced XLR connector for balanced stereo output;
One 1/4″ stereo headphone jack
Balanced Input 1
Unbalanced Input 1
CONTROL
Tone Controls No
Power Control Input 1
Power Control Output 1
GENERAL SPECIFICATIONS

Output Meters No
Vacuum Tube or Solid State
Vacuum Tube
Power Requirement 120V 50/60Hz, 1.5A
Standby Power Requirement <0.5 Watts
Output Type Unity Coupled Output Transformer
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D) 6-1/8″ (15.6cm) x 5-3/4″ (14.6cm) x 9-1/8″ (23.2cm)
Unit Weight 10.5 lbs (4.8 kg) Shipping Weight 12 lbs (5.5 kg)

  Γενικές Πληροφορίες  

The MHA100 is the first dedicated headphone amplifier from McIntosh and takes advantage of unique McIntosh technologies to yield the best possible personal listening experience regardless of the headphones you use. It employs a new adaptation of our unique Autoformer technology to produce three headphone impedance ranges of 8-40, 40-150 and 150-600 ohms so that every headphone – from ear buds to studio quality phones – will receive the optimal McIntosh sound.  
«The MHA100 addresses headphone listening for the purist who wants no compromises.» – Hi-Fi News  
«The Cadillac of headphone amplifiers.» – CNET
It features our new Headphone Crossfeed Director (HXD) to allow high quality recordings to image like conventional speakers in your headphones, bringing new depth and spatiality to your music. Four digital inputs allow the McIntosh Digital Engine to decode your digital music at up to 32 bits and 192kHz for maximum analog fidelity and enjoyment; two analog inputs are also available.
«The soundstage this amp presents through headphones is big and lifelike, and its accuracy and clarity across the frequency spectrum are reference-level good.» – Tone Audio  
«Nirvana from the first moment.» – Tendances Électroniques & Design
Love to listen to your headphones while working on your computer? Compared to our other amplifiers, the MHA100 is more compact and fits great on a desk, allowing you to enjoy your music while working. Its smaller size gives you additional flexibility to locate it almost anywhere in your space.  
«A headphone amp worthy of the McIntosh legacy… The MHA100 is a reference-level, musically engaging headphone amp/DAC combo from top to bottom.» – Audio360.org
«Perhaps the finest headphone amplifier currently in production.» – The Pro Audio Web Blog
50 watt stereo speaker outputs are included for when you want to enjoy your favorite speakers instead of your headphones; Power Guard® will prevent clipping that could damage your headphones or speakers. Tone controls include a 5 Step Bass Boost Control for further customization. The entire unit is housed in a beautiful polished stainless steel chassis that not only compliments the classic glass front panel, knobs and brushed aluminum end caps, but also any room decor.

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Headphone Output Specifications
Headphone Power OutputHigh Selection: 1W
Normal Selection: 250mW
Headphone Output Impedance 8-40 Ohms, 40-150 Ohms, 150-600 Ohms
Electronic Specifications
Power Output per Channel 50 Watts
Speaker Impedance 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.005%
Intermodulation Distortion 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
Dynamic Headroom 1.5dB
Frequency Response +0,-0.5dB20Hz to 20kHz
Frequency Response, +0, -3dB10Hz to 100kHz
Sensitivity (Unbalanced) 300mV
Sensitivity (Balanced) 600mV
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio105dB
Input Impedance (Balanced / Unbalanced)25K/25K
Damping Factor>150
Preamplifier Output 3V (8V maximum)
Preamplifier Output Impedance 500 Ohms
Voltage Gain 36.5dB
Power Guard <2% THD with up to 16dB overdrive at 1kHz
Digital Audio Specifications
Digital Coaxial Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital Optical Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital AES/EBU Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital USB Input Sample Rate 16Bit, 24Bit, 32Bit – 32kHz to 192kHz
Connectivity
Headphone Output1 (1/4″)
High Level Inputs Unbalanced 1 Stereo
High Level Inputs Balanced 1 Stereo
Digital Coaxial Input 1
Digital Optical Input 1
Digital AES/EBU Input 1
Digital USB Input 1
Preamplifier Output 1 Stereo
Control
Tone Controls 5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz
Power Control Input Yes
Power Control Output Yes
General Specifications
Output Meters Yes
Tube or Solid State, Solid State
Power Requirement 120V 50/60Hz, 1.5A
Standby Power Requirement <0.25 Watts
Output Autoformer Yes for Headphones
Weights & Dimensions
Dimensions (W x H x D)11-1/2″(29.2cm) x 5-9/16″ (14.1cm) x 18″ (45.7cm)
Weight 26.5 lbs (12 kg),

  Γενικές Πληροφορίες  

Intimately experience the legendary McIntosh sound with the MHP1000 headphones.

The MHP1000 headphones have the same superior sound characteristics as McIntosh speakers and will envelop you in your music. The smooth, full bodied, non-fatiguing response is easy to listen to and allows you to hear new facets of your favorite songs. Outside noise and distractions are isolated by the closed headphone design, fostering a fully immersive personal listening experience. The ear pads and headband are a premium, natural, soft leather for luxurious comfort. A lightweight design combined with​ minimal pressure used to secure them on your head permit long, relaxing listening sessions.

«The MHP1000 headphones have the crystal clarity… found in [McIntosh’s] legendary handmade amps.» – Men’s Journal​

The McIntosh designed headphone driver is engineered to work with any current or legacy McIntosh headphone amplifier​. Two detachable cables are included: a 1 meter cable with a 3.5mm stereo connector and a 3 meter cable with a 6.3mm stereo connector. Both cables feature gold plated McIntosh custom designed connectors and shielded wiring for maximum sound quality.

     Γενικές Πληροφορίες                             

​The MXA70 Integrated Audio System features a compact yet fully functional 50 watt stereo amplifier and a pair of specially designed 2-way desktop speakers. The speakers are finished in a luxurious, high gloss piano black, and achieve an unusually rich and full sized level of performance for their size.

Six inputs provide you the flexibility to connect a variety of your music sources; four of the inputs are digital and allow the McIntosh Digital Engine to decode your digital music at up to 32 bits and 192kHz for maximum analog fidelity and enjoyment.

For those times when you want to enjoy your music in a more intimate way, the MXA70 includes a dedicated headphone amplifier that takes advantage of unique McIntosh technologies so that every headphone – from ear buds to studio quality phones – will yield the best possible personal listening experience. Our new Headphone Crossfeed Director (HXD) enables high quality recordings to image like conventional speakers in your headphones, bringing new dimensions to your music.

The MXA70’s compact size gives you choice and flexibility when deciding where to place it in your room. It makes a great audio system for your office, bedroom or vacation house.

Our Power Guard® circuitry will prevent clipping that could damage your headphones or speakers, while a 5 Step Bass Boost Control allows for further tonal customization. The amplifier is housed in a beautiful polished stainless steel chassis that not only compliments the classic glass front panel, knobs, brushed aluminum end caps and gloss black speakers, but also blends nicely with any room decor.

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Electronic Specifications
Power Output per Channel 50 Watts
Speaker Impedance 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.005%
Intermodulation Distortion 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
Dynamic Headroom 1.5dB
Frequency Response  +0,-0.5dB20Hz to 20kHz
Frequency Response,  +0, -3dB10Hz to 100kHz
Sensitivity (Unbalanced) 300mV
Sensitivity (Balanced) 600mV
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio105dB
Input Impedance (Balanced / Unbalanced) 25K/25K
Damping Factor >150
Preamplifier Output 3V (8V maximum)
Preamplifier Output Impedance  500 Ohms
Voltage Gain  36.5dB
Power Guard <2% THD with up to 16dB overdrive at 1kHz
Loudspeaker Specifications
System Driver Complement One 4 inch Woofer/Midrange
One 3/4 inch Dome Tweeter
Impedance 8 Ohms Nominal
Frequency Response 60Hz – 45kHz
Sensitivity  80dB (2.83V/1m equivalent)
Crossover Frequency  2,000Hz
Power Handling  50 Watts
Enclosure FinishHigh Gloss Black
Grille Finish Black Knit Cloth
Digital Audio Specifications
Digital Coaxial Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital Optical Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital AES/EDU Input Sample Rate 16Bit, 24Bit – 32kHz to 192kHz
Digital USB Input Sample Rate 16Bit, 24Bit, 32Bit – 32kHz to 192kHz
Headphone Output Specifications
Headphone Power OutputHigh Selection: 1W
Normal Selection: 250mW
Headphone Output Impedance 8-40 Ohms, 40-150 Ohms, 150-600 Ohms
Connectivity
Headphone Output1 (1/4″)
High Level Inputs Unbalanced  1 Stereo
High Level Inputs Balanced  1 Stereo
Digital Coaxial Input  1
Digital Optical Input  1
Digital AES/EBU Input  1
Digital USB Input  1
Preamplifier Output  1 Stereo
Control
Tone Controls  5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz
Power Control Input  Yes
Power Control Output  Yes
General Specifications
Output Meters  Yes
Tube or Solid State  Solid State
Power Requirement  120V 50/60Hz, 1.5A
Standby Power Requirement  <0.25 Watts
Output Autoformer Yes for Headphones
Weights & Dimensions
Dimensions (W x H x D)22″ (55.9cm) x 10-7/8″ (27.62cm) x 18″ (45.7cm)
Weight51 lbs (23.2 kg),

The McIntosh McAire integrated audio system delivers the legendary McIntosh look and sound quality in a compact size. Built in AirPlay^® allows you to wirelessly stream music via your Wi-Fi network* from your Mac or PC based iTunes^® library, as well as music stored on your iPad,^® iPhone^® or iPod touch.^® Utilizing a USB cable, iPod classic and select iPod nanos can also be connected (see Specifications for complete list of compatible Apple devices).

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Network Input

Wired RJ45, 10/100 Base-T; Wireless 802.11, WPA; Apple AirPlay

USB Input

Type A Connector with Host Mode Music Streaming; 1Amp Charging for iPhone and iPod

AUX Input

Input Sensitivity – 200mVRMS nominal; Maximum Input Signal – 2.2VRMS; Stereo RCA Connectors

Loudspeaker Specifications

System Driver Complement

Two 4 inch Woofers (dual acoustic ports); Two 2 inch Inverted Dome Midranges; Two 3/4 inch Dome Tweeters

Frequency Response

60Hz – 45kHz

Crossover Frequency

250Hz
4,500Hz

Enclosure Finish

High Gloss Black

Grille Finish

Black Knit Cloth

Grille Attachment

Magnetic

General Specifications

Power Requirements

Field AC Voltage conversion of the McAire is not possible. The McAire is factory configured for one of the following AC Voltages:
240V ~ 50/60Hz at 25 watts
Standby: Less than 0.5 watt
Note: Refer to the rear panel of the McAire for the correct voltage.

Apple Compatibility

Compatible with the following devices with the latest Apple OS installed.

AirPlay Connection or USB Connection

iPod touch (4th generation)
iPod touch (3rd generation)
iPhone 4S
iPhone 4
iPhone 3GS

AirPlay Connection only

iPad
iPad 2
iPad New

USB Connection only

iPod classic
iPod nano (6th generation)
iPod nano (5th generation)

Weights & Dimensions

Dimensions (W x H x D)

19-3/8″ (49.2cm) x 8″ (20.3cm) (including wi-fi antenna in vertical position) x 17″ (43.2cm) (including connectors and wi-fi antenna)

Weight

31 lbs (14 kg)

Shipping Weight

44 lbs (19.9 kg),

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Power Output

75 watts into an 8 ohm load is the minimum sine wave continuous average power output, both channels operating

Output Load Impedance

8 ohms

Rated Power Band

20Hz to 20,000Hz

Total Harmonic Distortion

0.05% maximum harmonic distortion at any power level from 250 milliwatts to rated power, 20Hz to 20,000Hz

Dynamic Headroom

1.6dB

Frequency Response

+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz

Main/Sub Output

1.2V for rated input (4V Maximum)

Sensitivity (for rated output)

Input 1: 300mV unbalanced
Input 2: 600mV balanced

Signal To Noise Ratio (A-Weighted)

CD, Input1, Input 2: 98dB below rated output

Intermodulation Distortion

0.05% maximum, if the instantaneous peak power output is 150 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20,000Hz

Wide Band Damping Factor

Greater than 100

Input Impedance

Input 1: 20K ohms unbalanced
Input 2: 20K ohms balanced

Maximum Input Signal

Input 1: 4V
Input 2: 8V

Main/Sub Output Impedance

500 ohms

Power Guard

Less than 2% THD with up to 12dB overdrive at 1,000Hz

Voltage Gain

Input 1 and 2 to Main Output: 12dB Power Amplifier: 26dB

Tone Controls (Bass and Treble)

Bass ±10dB (in 1dB steps) at 70Hz
Treble ±10dB (in 1dB steps) at 10kHz

Headphone Impedance

20-300 ohms

FM Tuner Specifications

Tuning Range

87.5Mhz – 108.0Mhz (Europe)
87.9Mhz – 107.9Mhz (USA)
76Mhz – 90Mhz (Japan)

Antenna Input

75 Ohms, Type “F” Coax connector

Useable Sensitivity

2.2uV (18.1dBf)

50dB Quieting Sensitivity

1.5uV (14.8dBf)

Signal To Noise Ratio

Mono: 70dB
Stereo: 68dB

Frequency Response

±1dB 20 to 15,000Hz

Harmonic Distortion

Mono: 0.4%
Stereo: 0.8%

Channel Selectivity

60dB Adjacent Channel
66dB Alternate Channel

Stereo Separation

38dB

AM Tuner Specifications

Tuning Range

522khz – 1602khz (Europe)
530khz – 1710khz (USA)
522khz – 1611khz (Japan)

Antenna Input

RAA2 (supplied), Type “RJ45” connector

Sensitivity

350uV/m

Signal To Noise Ratio

50dB

Frequency Response

0dB, -6dB 50Hz to 3,000Hz

Harmonic Distortion

0.5%

Selectivity

45dB Adjacent Channel

SACD/CD Player Specifications

Disc Formats

SACD, CD, MP3 and WMA

Transport

Laser Type: Twin Beam
Laser Beam Wavelength:650nm (SACD)/790nm (CD)
Laser Power: CLASS IIa/CLASS I

Dynamic Range

Better than 100dB

Channel Separation

Better than 98dB (1,000Hz)

Loudspeaker Specifications

System Driver Complement

One 4 inch Woofer/Midrange
One 3/4 inch Dome Tweeter

Impedance

8 ohms Nominal

Frequency Response

60Hz – 45kHz

Sensitivity

80dB (2.83V/1m equivalent)

Crossover Frequency

2,000Hz

Power Handling

75 Watts

Enclosure Finish

High Gloss Black

Grille Finish

Black Knit Cloth

General Specifications

Power Requirement

230V ~ 50/60Hz at 1.3 Amps
240V ~ 50/60Hz at 1.3 Amps
Standby: Less than 0.5 watt Note: Refer to the rear panel of the MXA60 for the correct voltage.

Weights & Dimensions

Dimensions (W x H x D)

22″ (55.88cm) x 10-7/8″ (27.62cm) x 16″ (40.64cm) (including connectors)

Weight

64 lbs (29.03 kg)

Για την καλύτερη ενημέρωση σας και εξυπηρέτηση παρακαλούμε επικοινωνήστε μαζί μας στα τηλέφωνα 210 3845272 και 210 3845676 για προιόντα και τιμές που δεν αναφέρονται ή επισκεφθείτε μας ξανά για περισσότερα νέα προϊόντα και υπηρεσίες.

Επίσης με χαρά θα θέλαμε να μας δώσετε (στείλετε) τη γνώμη σας και τις υποδείξεις σας στο

e-mail : sales@hifipower.gr.

Ευχαριστούμε για την βοήθεια και την κατανόηση,