Top of the line silver cable for the Super10 consisting of 4×10 and 4×6 0.4mm 99.9999% silver wires. The sound character is open, well articulated, huge stage and brings added sprite while maintaining balance. When looking for a more natural and well balanced sound with lots of micro details, we recommend the Level 3 copper cable.You can find listening impressions about this and other cables here

Active current compensation
The Super10 incorporates an active current compensation circuit, which corrects for the voltage drop in the output, PCB traces and the cables of the Super10. This reduces the voltage drop at the load when current needs to be delivered, resulting in a rock steady sound on any load. 

Foil output stage
The Super10 has a 230uF foil capacitor output stage, combining MKS and MKP capacitors for optimal operation and ultimate sound quality. Because no electrolytic capacitors are used, ESR is very low and Hf filtering very high. Result is a pitch-black background and ultimate speed delivery of voltage peaks over the full bandwidth. Very good for analog audio, but especially great for driving digital equipment.
Read more on Tech talk

TMCB & FI-09 NCF Inlet
The Super10 is standard fitted with a thermal magnetic circuit braker. Soundwise superior to about any conventional fuse we have heard, even the very expansive ones! The sound is as seductive as addictive, redefines “natural” and “flow” in an endless soundstage. Hearing is believing.
It didn’t take long to decide the world renowned Furutech FI-09 NCF Inlet would be the inlet of choice for the Super10. With its mechanical and electrical stability, low noise floor, detailed sound, and ultra stable image the FI-09 NCF and Super10 are just natural partners.

Shielded tranformer & Choke
To eliminate even the most minute hum, buzz or negative influence from the magnetic field of the custom wound transformer and choke, we have potted and shielded these to ensure a dead quit operation and completely undisturbed dc output.

Πληροφορίες Χρήσεως,

Τεχνικά Χαρακτηριστικά

Specification

Brand FARAD
Type Level 3 Cable
Material Silver
Cable length    80 cm
Connector IN GX25-4
Connector OUT 5.5/2.5
Level    Level 3
Warranty 2 years
Compatibility Farad Super10,

Configure your Super10 for AC mains, DC Output and DC Connector type. You can upgrade your supply with DC Output cables as well as an AC cable. If in doubt about the output voltage or connector type, please look at the confirmed loads page or send us an e-mail. Configure your Super10 for AC mains, DC Output and DC Connector type. You can upgrade your supply with DC Output cables as well as an AC cable. If in doubt about the output voltage or connector type, please look at the confirmed loads page or send us an e-mail.
Mains AC input voltage 230V, DC Output voltage 24 – 19 – 15 – 12 – 9 – 7 – 6 – 5 Volt,

• POWER OVAL 2  1.5m
• POWER OVAL 2  1.8m
• POWER OVAL 2  2.4m
• POWER OVAL 2  3.0m

• POWER OVAL TEN  1.5m
• POWER OVAL TEN  1.8m
• POWER OVAL TEN  2.4m

Bulk Power Oval 10 cable is 10 AWG and UL CL2 and UL 600 Volt rated.