Τεχνικά Χαρακτηριστικά

• Unique pressure die-cast magnesium shell detachable and interchangeable without disturbing cartridge or wiring.
• New design clamping arrangement ensures rigid junction with tone-arm. 
• Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
• Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm precision ball races. Axis at record mean level to minimise warp-wow.
• Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted.
• Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
• 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
• Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has positive OFF position.
• Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
• Dual-lock base provides movement control with high rigidity.
• Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding.
• Underslung weight housing corrects centre of gravity and provides non reflective tone-arm termination.
• Swivelling, damped output socket minimises vibration transmission in sub-chassis use.
• Reference lines on tone-arm facilitate VTA setting.
• Fine adjustment of horizontal tracking angle (HTA).
• New design alignment protractor sets HTA with great accuracy.
• Cartridge leads and internal wiring LCOFC litz.
• Balanced LCOFC audio lead with gold plated phono plugs,

The work took almost four years and the measure of its success is the acceptance of the Series V precision pick-up arm by technical experts and users as one of the world’s truly great audio products. Series V sound has an almost startling dynamic range and neutrality enabling high levels to be enjoyed. It escapes the ‘LP’ sound and demonstrates that structural resonances in pick-up arms are responsible for much that makes vinyl records readily discernible from master tapes.

Unique one-piece pressure die-cast tone-arm utilising the advantages of magnesium, replace conventional fabricated construction.
Internal constrained layer damps minute residual vibration leaving the tone-arm acoustically inert. Fine machined cartridge platform, enamel free to avoid interface resonance.
A Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm ball races. Axis at record mean level to minimise warp-wow.
Dynamic balance graduated vertical tracking force (VTF) control applies 0-3g x 0.125g through resonance controlled spring.
Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted.
Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm ball races, widely spaced to resist tilt.

DAMPING
Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has positive OFF position.
Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
Subsonic lateral mode fluid damper can be instantly adjusted or cancelled.
Dual-lock base provides movement control with high rigidity.
Swivelling damped output socket minimises vibration transmission in sub-chassis use.

ADJUSTMENTS
Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding.
Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination. Adjustment leadscrew journalled in twin ball races with lever clamping.
Fine adjustment of arm height (VTA).
Reference lines on tone-arm facilitate VTA setting.
Fine adjustment of horizontal tracking angle (HTA).

Series V Dimensions    
A – Distance from pivot to stylus    233.15mm
B – Distance from pivot to turntable centre    215.35mm
C – Cartridge fixing centres    12.70mm
D – Offset angle    23.635°
E – Linear offset    93.47mm
F – Overhang    17.8mm
G – Height above mounting surface    max. 87.90mm
min. 56.40mm
H – Height of record surface above mounting surface    max. 57.90mm
min. 26.40mm
J – Depth below mounting surface    56.75mm
K – Radial clearance for balance weight    73.0mm
L – Clearance between cabinet lid and record surface assuming cartridge height at 17.0mm    35.0mm

Τεχνικά Χαρακτηριστικά

Series V Specifications    
Effective mass    10.0/11.0g
Cartridge balance range    4.2 – 18.0g
Vertical tracking force    0 – 3.0g(30mN)
Maximum tracking error    0.012(degrees per mm)
Null points    Inner 66.04mm
Outer 120.90mm
Audio lead    Length 1.2m
Capacitance 140.0 pF per channel
Resistance 0.145 ohms per conductor
Internal wiring    Capacitance 15.0 pF per channel
Resistance 0.5353 ohms per conductor
Output plug and socket    DIN 5-pole 240°
Weight net    720.0g,

Γενικές Πληροφορίες   Χρήσεως Πληροφορίες,

Μεταχειρισμένα:

* * * * *  Demo ή Καινούργιο, NOS (Νew On Stock), Άριστη κατάσταση, κουτιά, manual και εγγύηση.

* * * *     Χρησιμοποιημένο, άψογη λειτουργική κατάσταση, χωρίς κανένα εμφανές οπτικό ελάττωμα, με κουτιά και ίσως εντός εγγυήσεως.

* * *        Χρησιμοποιημένο, άψογη λειτουργική κατάσταση,  ίσως κάποια αμυχή, ίσως να μην υπάρχουν κουτιά.

* *          Χρησιμοποιημένο, άψογη λειτουργική κατάσταση,,

The Series IV precision pick-up arm owes much to the technology developed for the acclaimed Series V. Although presented at a lower price it retains the unique one-piece magnesium tone-arm, dual-lock base and other advanced features listed.

Τεχνικά Χαρακτηριστικά

Unique one-piece pressure die-cast tone-arm utilising the advantages of magnesium, replaces conventional fabricated construction.

Internal constrained layer damps minute residual vibration leaving the tone-arm acoustically inert.

Fine machined cartridge platform, enamel free to avoid interface resonance.

Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm ABEC 3 ball races. Axis at record mean level to minimise warp-wow.

Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted.

Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.

23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm ABEC 7 ball races, widely spaced to resist tilt.

Anti-skate control operates through tension spring and filarnent. Dial corresponds with VTF and haspositive OFF position.

Lowering/raising control gives smooth positive action. Height of lift can be adjusted.

Dual-lock base provides movement control with high rigidity.

Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding.

Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination. Adjustment leadscrew journalled in twin ball races with lever clamping.

Swivelling damped output socket minimises vibration transmission in sub-chassis use.

Reference lines on tone-arm facilitate VTA setting.

Fine adjustment of horizontal tracking angle (HTA)

New design alignment protractor sets HTA with great accuracy.

Γενικές Πληροφορίες   Χρήσεως Πληροφορίες,

Μεταχειρισμένα:

* * * * *  Demo ή Καινούργιο, NOS (Νew On Stock), Άριστη κατάσταση, κουτιά, manual και εγγύηση.

* * * *     Χρησιμοποιημένο, άψογη λειτουργική κατάσταση, χωρίς κανένα εμφανές οπτικό ελάττωμα, με κουτιά και ίσως εντός εγγυήσεως.

* * *        Χρησιμοποιημένο, άψογη λειτουργική κατάσταση,  ίσως κάποια αμυχή, ίσως να μην υπάρχουν κουτιά.

* *          Χρησιμοποιημένο, άψογη λειτουργική κατάσταση,,

Για την καλύτερη ενημέρωση σας και εξυπηρέτηση παρακαλούμε επικοινωνήστε μαζί μας στα τηλέφωνα 210 3845272 και 210 3845676 για προιόντα και τιμές που δεν αναφέρονται ή επισκεφθείτε μας ξανά για περισσότερα νέα προϊόντα και υπηρεσίες.

Επίσης με χαρά θα θέλαμε να μας δώσετε (στείλετε) τη γνώμη σας και τις υποδείξεις σας στο

e-mail : sales@hifipower.gr.

Ευχαριστούμε για την βοήθεια και την κατανόηση,