Technical data Cable structure Properties
• Bare copper, fine wire conductors, bunch stranded to DIN VDE 0295 cl.5, BS 6360 cl.5 and IEC 60228 cl.5 • Special-PVC control cable adapted •  Extensively oil resistant, oil-/chemical resistance see table Technical Informations • The materials used in manufacture are
cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers • Temperature range • flexing -15°C to +80°C fixed installation -40°C to +80°C Core insulation of special PVC compound type Z 7225 • Core identification to JB/OB colour code • GN-YE conductor, 3 cores and above in the outer layer • Nominal voltage up to 1,5 mm² U0/U 300/500 V from 2,5 mm² U0/U 450/750  V

Tests
• PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B) • Cores stranded in layers with • Test voltage 4000 V optimal lay-length • Breakdown voltage min. 8000 V • Inner sheath of PVC • Tinned copper braided screen, approx. 85% coverage • Insulation resistance min. 20 MOhm x km • Mutual capacitance • Outer sheath of special PVC Note acc. to different cross-sections 0,5 up to 2,5 mm²: core/core approx. 150 nF/km core/screen approx. 270 nF/km • Sheath colour transparent • G = with green-yellow conductor • with meter marking x = without green-yellow conductor (OB). • by 5 cores with VDE-Reg. No. • AWG sizes are approximate equivalent • Coupling resistance values. The actual cross-section is in mm². max. 250 Ohm/km • unscreened analogue type: JB-500 JB-750 • Minimum bending radius flexing 10x cable Ø fixed installation 5x cable Ø • Radiation resistance up to 80×106 cJ/kg (up to 80 Mrad)
Application
For use as a data and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening ensures a high degree of interference protection. The screening density assures disturbance-free transmission of all signals and impulses. The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical view of the tinned copper braid. These cables are suitable for flexible use for medium mechanical stresses with free movements. The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above application. EMC = Electromagnetic compatibillity To optimize the EMC features we recommend a large round contact of the copper braiding on both ends. The product is conformed with the EC Low-Voltage Directive 2006/95/EC.

Τεχνικά Χαρακτηριστικά:

• Temperature range • flexing -15°C to +80°C fixed installation -40°C to +80°C
• Core identification to JB/OB colour code
• GN-YE conductor, 3 cores and above in the outer layer
• Nominal voltage up to 1,5 mm² U0/U 300/500 V from 2,5 mm² U0/U 450/750 V
• PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2,
• Cores stranded in layers with
• Test voltage 4000 V optimal lay-length
• Breakdown voltage min. 8000 V • Inner sheath of PVC
• Tinned copper braided screen, approx. 85% coverage
• Insulation resistance min. 20 MOhm x km
• Mutual capacitance • Outer sheath of special PVC Note acc. to different cross-sections 0,5 up to 2,5 mm²:core/core approx. 150 nF/km
core/screen approx. 270 nF/km
• Sheath colour transparent • G = with green-yellow conductor
• with meter marking x = without green-yellow conductor (OB).
• AWG sizes are approximate equivalent
• Coupling resistance values. The actual cross-section is in mm². max. 250 Ohm/km 

,

  Γενικές Πληροφορίες

Τεχνικά Χαρακτηριστικά:

AUDIO Cable/Coaxial Type(100M/Reel)
Rating：
18 AWG α-Conductor (0.94 sq.mm)
Features：
※α-Conductor ：The fine μ–OFC conductor wire strands and treated by α(Alpha) process.
Specifications：
* Conductor:α-Conductor(37pcs×0.18mm)
* Insulation:Air-foamed Polyethylene
* Shiled: 0.12mm α(Alpha)Conductor wire Braid
* Sheath:Flexible PVC (Sky Blue pearl)
* Max. Conductor Resistance: 0.023 Ω/ M
* Overall Diameter:7.0 mm (18 AWG)

RATING
Updated Evolution Audio Cables
Pure Transmission Performance for Value Conscious Audiophiles

Furutech’s Evolution Series was awarded The Absolute Sound Editors’ Choice Award in both 2007 and 2008
FEATURES
High Performance Addiction • Audiophiles Want What They Need
All enthusiasts are looking for the same things: Verisimilitude, a sense of engagement promoting suspension of disbelief, a veritable immersion in audio and video experience. To detach without effort from modern time’s exigencies requires meticulous preparation of the entire playback chain, especially cables, power cords and AC distribution.

Evolution, an update of the extremely well received Evolution series, incorporates newly-engineered anti-resonance cable clamps as well as an upgraded dielectric/insulation of RoHS-compliant Pb-free PVC incorporating anti-resonance carbon particles in its manufacture. Our Pure Transmission philosophy
incorporates rhodium-plated pure copper conductors, even the IEC connectors of the Evolution II power cord. No detail too small, every element of signal and power transmission engineered to within an inch of its life, treated with advanced processes, and turned out with beautiful design and build quality to enrich every music experience.

・High performance beautifully engineered gold-plated RCA connectors [FP-110 (G)] .
・RCA center pin 24k gold-plated nonmagnetic α (Alpha)-OCC conductor with Teflon dielectric
・RCA connector backbone composed of nonmagnetic 24k gold-plated eutectic cast copper alloy with beautifully finished nonmagnetic copper alloy outer locking shell
・Shield 1 0.12 mm α (Alpha) conductor wire braid
・Cable insulated with polypropylene reducing capacitance and damping vibration
・Results in greater resolution, clarity, powerful dynamics, and an ultra-quiet soundstage in which music develops more fully without artificial upper-frequency “presence region” glare

α (Alpha) Conductor Is Composed Of Fine OCC Wire Strands
Treated With Furutech’s α (Alpha) Cryogenic and Demagnetizing Process

・ α (Alpha)-OCC Conductor wires are treated with the FURUTECH α(Alpha) to minimize transmission loss.
・Finished with High Performance FP-110 (G) RCA or FP-701M(G)/702F(G) XLR Connectors.
・FP-110 (G) non-magnetic 24k Gold Plated PCOCC central pin with dielectric Teflon. Body made using non-magnetic 24k Gold Plated Eutectic cast Brass. Non-magnetic Brass Housing (Black).
・Shielded with 0.12 mm α(Alpha) conductor wire Braid realizing superior noise isolation.
・Insulated with high quality Polypropylene which contributes to a reduction in capacitance.

“… wholeheartedly recommend these cables to someone looking for more from their present system.”
— Brett Rudolf EnjoyTheMusic.com

“Furutech’s cables offer great transparency and purity, plus an uncanny ability to block out noise and grunge.”
— Chris Martens The Absolute Sound
 

Τεχνικά Χαρακτηριστικά

SPECIFICATIONS
・Conductor：α(Alpha) conductor （80 pcs／0.18 mm）,Diameter：1.86 mm
・Insulation：Polypropylene (Red, White) ,Diameter：2.46 mm
・Twisting：2 Cores Twisted Together with Cotton Yarn.
・Barrier Layer：Non-woven Fabric（Warp）, Diameter：5.0 mm Approx.
・Shield：α(Alpha) conductor 0.12 mm Braid, Diameter：6.0 mm Approx.
・Sheath: Flexible PVC (Dark Green), Diameter：9.0 mm
・Jacket：Nylon Yarn Braid, Diameter：10.0 mm Approx.

Electrical Properties of Cable / Test Method

・Max. Conductor Resistance 10.0 Ω／km,JISC3005 4.4 20℃
・Min. Insulation Resistance 1000 MΩ‧km,JISC3005 4.7.1 20℃
・Dielectric Strength AC. 500 V／1 min.,JISC3005 4.6 a
・Electrostatic Capacitance Approx 42 PF／m,at 1 KHz
・Characteristic Impedance Approx 120 Ω,at 100 KHz,

FEATURES
High Performance Addiction • Audiophiles Want What They Need
All enthusiasts are looking for the same things: Verisimilitude, a sense of engagement promoting suspension of disbelief, a veritable immersion in audio and video experience. To detach without effort from modern time’s exigencies requires meticulous preparation of the entire playback chain, especially cables, power cords and AC distribution.

Evolution II, an update of the extremely well received Evolution series, incorporates newly-engineered anti-resonance cable clamps as well as an upgraded dielectric/insulation of RoHS-compliant Pb-free PVC incorporating anti-resonance carbon particles in its manufacture. Our Pure Transmission philosophy
incorporates rhodium-plated pure copper conductors, even the IEC connectors of the Evolution II power cord. No detail too small, every element of signal and power transmission engineered to within an inch of its life, treated with advanced processes, and turned out with beautiful design and build quality to enrich every music experience.

・High performance beautifully engineered gold-plated [FP-701M(G)/FP-702F (G)] XLR connectors
・XLR connector pins beautifully engineered copper alloy α (Alpha)-conductor with PBT dielectric
・XLR body and housing made of nonmagnetic copper alloy
・Shield 1 0.12 mm α (Alpha) conductor wire braid
・Cable insulated with polypropylene reducing capacitance and damping vibration
・Results in greater resolution, clarity, powerful dynamics, and an ultra-quiet soundstage in which music develops more fully without artificial upper-frequency “presence region” glare

α (Alpha) Conductor Is Composed Of Fine OCC Wire Strands
Treated With Furutech’s α (Alpha) Cryogenic and Demagnetizing Process

・ α (Alpha)-OCC Conductor wires are treated with the FURUTECH α(Alpha) to minimize transmission loss.
・Finished with High Performance FP-701M(G)/702F(G) XLR Connectors.
・The pin of FP-601M(R)/602F(R) is made using non-magnetic 24k Gold Plated Eutectic cast Brass with dielectric PBT. Non-magnetic Brass Housing (Black).
・Shielded with 0.12 mm α(Alpha) conductor wire Braid realizing superior noise isolation.
・Insulated with high quality Polypropylene which contributes to a reduction in capacitance.

“… wholeheartedly recommend these cables to someone looking for more from their present system.”
— Brett Rudolf EnjoyTheMusic.com

“Furutech’s cables offer great transparency and purity, plus an uncanny ability to block out noise and grunge.”
— Chris Martens The Absolute Sound,

Τεχνικά Χαρακτηριστικά
SPECIFICATIONS

・Conductor：α(Alpha) conductor （80 pcs／0.18 mm）,Diameter：1.86 mm
・Insulation：Polypropylene (Red, White) ,Diameter：2.46 mm
・Twisting：2 Cores Twisted Together with Cotton Yarn.
・Barrier Layer：Non-woven Fabric（Warp）, Diameter：5.0 mm Approx.
・Shield：α(Alpha) conductor 0.12 mm Braid, Diameter：6.0 mm Approx.
・Sheath: Flexible PVC (Dark Green), Diameter：9.0 mm
・Jacket：Nylon Yarn Braid, Diameter：10.0 mm Approx.

Electrical Properties of Cable / Test Method

・Max. Conductor Resistance 10.0 Ω／km,JISC3005 4.4 20℃
・Min. Insulation Resistance 1000 MΩ‧km,JISC3005 4.7.1 20℃
・Dielectric Strength AC. 500 V／1 min.,JISC3005 4.6 a
・Electrostatic Capacitance Approx 42 PF／m,at 1 KHz
・Characteristic Impedance Approx 120 Ω,at 100 KHz,

FEATURES
Furutech’s α (Alpha) OCC is one of a select few of conductors that Furutech engineers have found to excel in sound reproduction. α (Alpha) OCC is made with high-purity oxygen-free copper using a special casting process. Unlike regular OFC, almost all of the impurities of this high-purity OCC have been removed at the micron level through a special casting process unique to Furutech.

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

High End Performance α (Alpha) OCC Speaker Cable
RATING
Max. Conductor Resistance: Ω／km 5.3 (JISC3005 6 20℃)
Min. Insulation Resistance: MΩ‧km >100 (JISC3005 9.1 20℃)
CAPACITANCE: PF/M    41.7    at 1KHz
INDUCTANCE: uH/M    1.4    at 1KHz
Dielectric Strength: V／1 min. AC 1000 (JISC3005 8)
SPECIFICATIONS
Conductor    Material: α(Alpha) OCC
Construction（pcs／mm): 20pcs / ψ0.18 mm X 6+ψ0.9mm Incorporating damping carbon particles in center filler core
Insulation    Material: Audio grade PE (Red,White)
Nom. Thickness: 1.25mm
Diameter: 5.1mm
Twisting Method: 2 Cores Twisted Together
Inner Sheath Material: Audio grade flexible PVC (Black) Incorporating damping carbon particles
Sheath Material: Audio grade Flexible PVC (Purple Blue)
Nom. Thickness: 1.0 mm
Overall Diameter Approx.: 13.0mm,

Summary：
Speaker Cable (40M/Reel)
α(Alpha) conductor(PCOCC:6 ×20/0.18mm（PE into the
center）
Rating：
13 AWG α(Alpha)Conductor(3.05 sq.mm)
Features：
*α(Alpha)-Conductor—The fine PCOCC Conductor wire
are treated with the α(Alpha) Process (Super Cryogenic &
Demagnetizing Treatment)
Specifications：
* Conductor:α(Alpha)conductor(6 ×20/0.18mm（PE into
the center）)
* Insulation:Foamed Irradiated PE （White × Red）
* Sheath:Flexible PVC（Purple red）
* Overall Diameter:13.0 mm (13 AWG),