Introducing the SA-500.1 ES: a powerhouse Class AB solid-state mono-block power amplifier delivering an impressive 500 watts of pure audio excellence per channel. Cary Audio’s continuing venture into solid-state technology with the SA-500.1 ES showcases innovation without bounds, promising natural sound reproduction and unmatched clarity.

Envelope yourself in a sonic experience defined by sure-footed, visceral sound, where smooth vocals and extended upper-end clarity reign supreme – a signature of Cary Audio’s legendary profile. Crafted with precision and attention to detail, the SA-500.1 ES epitomizes unparalleled build quality, elevating your audio journey with sophistication and unrivaled purity. Discover the difference Cary Audio excellence will make in your listening experience.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    1 x 500 watts @ 8 Ohms from 20Hz to 20KHz
1 x 1000 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    30K Ohms RCA-unbalanced
30K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    1 RCA, 1 XLR
Audio Output    1 pair Heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

Introducing the SA-500.1 ES: a powerhouse Class AB solid-state mono-block power amplifier delivering an impressive 500 watts of pure audio excellence per channel. Cary Audio’s continuing venture into solid-state technology with the SA-500.1 ES showcases innovation without bounds, promising natural sound reproduction and unmatched clarity.

Envelope yourself in a sonic experience defined by sure-footed, visceral sound, where smooth vocals and extended upper-end clarity reign supreme – a signature of Cary Audio’s legendary profile. Crafted with precision and attention to detail, the SA-500.1 ES epitomizes unparalleled build quality, elevating your audio journey with sophistication and unrivaled purity. Discover the difference Cary Audio excellence will make in your listening experience.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    1 x 500 watts @ 8 Ohms from 20Hz to 20KHz
1 x 1000 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    30K Ohms RCA-unbalanced
30K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    1 RCA, 1 XLR
Audio Output    1 pair Heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

The introduction of the SA-200.2 ES solid-state power amplifier represents the next generation of the SA-200.2 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.

The SA-200.2 ES is a 200 watt stereo amplifier into 8 ohms, (350 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.

When we designed the SA-200.2 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal, we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

The following section describes the SA-200.2 ES basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    2 x 200 watts @ 8 Ohms from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    22K Ohms RCA-unbalanced
22K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    2 RCA, 2 XLR
Audio Output    2 pairs of heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

The introduction of the SA-200.2 ES solid-state power amplifier represents the next generation of the SA-200.2 design. It embodies a modular approach that ensures consistency in performance, and ease of manufacture and serviceability. In implementing the new design, we have dramatically improved performance and current-handling capacity over the previous model while still maintaining the highest levels of sonic quality.

The SA-200.2 ES is a 200 watt stereo amplifier into 8 ohms, (350 watts into 4 ohms), with balanced and single ended inputs. The amplifier exhibits very high current capability, is stable into low impedance loads, and features 3 dB of dynamic headroom.

When we designed the SA-200.2 ES power amplifier, one of our primary goals was to create a product that would give years of consistent and reliable use without any maintenance. To achieve that goal, we took a hard look at the design and choice of components. For example, we use high-precision metal film resistors in almost all our circuitry, even in places where their use is not required. We have overbuilt the output stage and increased the heat dissipating capabilities of the amplifier by as much as 50% over previous designs. The changes encompass almost every part of the design, down to the choice of thickness of the chassis sheet metal. The monolithic front end brought major advantages to the amplifier design with improved temperature stability, low offset, and a substantial reduction of all types of distortion across the full frequency spectrum.

The following section describes the SA-200.2 ES basic specifications. The specifications are subject to change without notice or obligation.

Τεχνικά Χαρακτηριστικά

Circuit Type    Solid State, Class A/B
Power Output    2 x 200 watts @ 8 Ohms from 20Hz to 20KHz
2 x 350 watts @ 4 Ohms from 20Hz to 20KHz
Frequency Response    10Hz – 50KHz +/- 0.1 dB
Signal-to-Noise Ratio    >100dB, “A” Weighted
Input Impedance    22K Ohms RCA-unbalanced
22K Ohms – Balanced (XLR)
Voltage Gain    28 dB
AC Power Requirements    117/234 Volts AC @ 50/60 Hz
Break-In Time    100 hours of playing time
Audio Input    2 RCA, 2 XLR
Audio Output    2 pairs of heavy-duty, gold-plated binding posts
THD    Less than 0.05% at rated output
Damping Factor    Greater than 400 from 10Hz to 400Hz
Remote Trigger    3.3-24v DC at 5mA or greater
Finish    Black powder coated matte chassis with silver or black aluminum faceplate
Weight    65 lbs
Dimensions    7.75” H x 17.7”W x 19.5 ”D,

Χρήσεως Πληροφορίες,   Γενικές Πληροφορίες,

The MC205 delivers all the explosive dynamics
that high-performance home theater systems
require by delivering 200 watts of power to each
of the 5 individual channels commonly used in
home theaters.
■ Massively over built amplifier design does not
require cooling fans so the most subtle film
soundtracks are not masked by common amplifier
fan noise.
■ Precision McIntosh power watt meters allow
monitoring of the primary front sound stage while
clever engineering matches the output of MC205
with all speaker types.
■ Features many notable McIntosh technologies
including Power Guard® to prevent harsh sounding
clipping that could damage your speakers as well as
Sentry Monitor™ that shuts down the unit if current
exceeds safe operating level.
■ May be combined with a stereo amplifier to
complete a five channel home theater plus two
channel remote zone

Τεχνικά Χαρακτηριστικά
Power Output:
Minimum sine wave continuous average
power output per channel, all channels
operating is: 200 Watts into a 4 Ohm or
8 Ohm load.

Output Load Impedance:
8 and 4 Ohms

Rated Power Band:
20Hz to 20kHz

Total Harmonic Distortion:
0.005% maximum harmonic distortion at
any power level from 250 milliwatts to
rated power, 20Hz to 20kHz.

Overall Dimensions (W x H x D):
17-1/2″ (44.45cm) x 9-7/16″ (23.97cm)
including feet x 21″ (53.3cm) including the
front panel and cables

Weight:
81 lbs. (44.2kg) net
114 lbs. (51.8kg) in shipping carton

Dynamic Power Manager® (DPM):
By matching the characteristics of the
output stage to 4 or 8 Ohm loudspeakers,
DPM insures the most efficient power
transfer, reduces distortion, and promotes
cool operation; with DPM you get all the
power you paid for.

Wattmeter:
Swift, accurate response reveals program
peaks so staying within the power limits
of your loudspeakers is easy.

For the Consumer’s Protection:
In order to ensure the highest level of customer
satisfaction, new McIntosh products may only be
purchased from an Authorized McIntosh Dealer;
and, with certain limited exceptions may only be
purchased over-the-counter or delivered and
installed by the Authorized McIntosh Dealer.
McIntosh does not warrant, in any way, products
that are purchased from anyone who is not an
Authorized McIntosh Dealer, or that have had
their serial numbers altered or deface,

Τεχνικά Χαρακτηριστικά

Power Output per Channel 300W @ 2, 4 or 8 Ohms

Number of Channels 3

Total Harmonic Distortion 0.005%

S/N below rated output 112dB

Dynamic Headroom 1.8dB

Damping Factor 40

Rated Power Band 20Hz to 20kHz

Frequency Response +0,-0.25dB 20Hz to 20kHz

Frequency Response -3dB 10Hz to 100kHz

Control Remote Power Control Yes

Multi Channel DB25 Cable No

General Specifications Circuit Configuration

Push-Pull Complementary Autoformers

Circuit Design Transistor

Mono Bridge No

Mono Parallel No

Autoformer Yes

Meters Yes

Meter Light Switch Yes

Balanced Input Yes

Front Panel Glass with handles

Illumination LED Fiber Optic

Chassis Style Inverted

Gold Plated Binding Posts Yes

Weights & Dimensions Dimensions (W x H x D)

17-3/4″ (45.09cm) x 12-3/8″ (31.43cm) (including feet) x 22″ (55.88cm) (including front panel and cables)

Weight 155 lbs (70.3 kg),