Goldring 1012GX

This hand-built cartridge uses the acclaimed Gyger II nude diamond stylus. A fine-line elliptical type with a 6 µm small radius it gives smooth, extended highs, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. Because it fills the record groove more completely due to its larger major radius, the Gyger II represents a major upgrade over normal elliptical stylus types.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Βελόνα για την κεφαλή Goldring G 1012GX, Τιμή 225€

Τεχνικά Χαρακτηριστικά

Cantilever TypeAluminium
Stylus TypeGyger II (replaceable)
Stylus Tracking Radius6 µm (0.2 mil)
Equivalent Tip Mass0.45 mg
Frequency Response20 Hz – 20 kHz ± 3 dB
Frequency Range12 Hz – 42 kHz
Channel Imbalance1.0 dB max at 1 kHz
Channel Separation25 dB min at 1 kHz
Sensitivity5 mV ± 3 dB at 5 cm/s lateral
Static Compliance24 mm/N (lat); 16 mm/N (vert)
Trackability80 µm
Vertical Tracking Angle24 °
Load Resistance47 kΩ
Load Capacitance125 – 225 pF (175 pF nominal)
Internal Inductance470 mH
Internal Resistance820 Ω
Cartridge Mass6.2 g
Cartridge Mass (inc. fixings)7.6 g
Fixing Centre12.7 mm
Playing Weight1.5 – 2 g (1.75 g nominal)
Cartridge Height17 mm
Recommended Tonearm Effective Mass5 – 25 g,

,

Super OM 5E
The Super OM 5E features improved lineraty, higher channel seperation, and an Elliptical stylus that provides balanced and distortion-free playback. The Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.

• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Τεχνικά Χαρακτηριστικά

Channel balance at 1 kHz 1.5 dB
Output voltage at 1 kHz, 5cm/sec 4 mV
Channel seperation at 1 kHz 22 dB
Channel seperation at 15 kHz 15 dB
Frequency response 20 Hz – 20 kHz 20-22.000 Hz + 3 / -3
Tracking ability at 315Hz at recommended tracking force 60 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1.5-2.0 g (15-20 mN)
Tracking force, recommended 1.75 g (17.5 mN)
Tracking angle 20°
Internal impedance, DC resistance 1 kOhm
Cartridge colour Black/Black
Cartridge weight incl. extra weight 5 g, excl. extra weight 2.5 g
Recommended load resistance 47 kOhm
Internal inductance 580 mH
Recommended load capacitance 200-500 pF,

The Stylus 2M Red is recommended for following cartridges:     2M Red,   2MR Red,   2M Red Premounted

Τεχνικά Χαρακτηριστικά

Frequency range – 20-22.000 Hz
Frequency response – 20-20.000 Hz + 3 / – 1 dB
Tracking ability at 315Hz at recommended tracking force *) – 70 µm
Compliance, dynamic, lateral – 20 µm/mN
Stylus type – Elliptical
Stylus tip radius – r/R 8/18 µm
Equivalent stylus tip mass – 0.5 mg
Tracking force range – 1.6-2.0 g (16-20 mN)
Tracking force, recommended – 1.8 g (18 mN)
Tracking angle – 20°
*) Typical value,   

Ανταλακτική βελόνα Stylus 5e,  

Super OM 5E
The Super OM 5E features improved lineraty, higher channel seperation, and an Elliptical stylus that provides balanced and distortion-free playback. The Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.

• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Τεχνικά Χαρακτηριστικά

Specifications
Channel balance at 1 kHz 1.5 dB
Output voltage at 1 kHz, 5cm/sec 4 mV
Channel seperation at 1 kHz 22 dB
Channel seperation at 15 kHz 15 dB
Frequency response 20 Hz – 20 kHz 20-22.000 Hz + 3 / -3
Tracking ability at 315Hz at recommended tracking force 60 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1.5-2.0 g (15-20 mN)
Tracking force, recommended 1.75 g (17.5 mN)
Tracking angle 20°
Internal impedance, DC resistance 1 kOhm
Cartridge colour Black/Black
Cartridge weight 2.5 g
Reccomended load resistance 47 kOhm
Internal inductance 580 mH
Recommended load capacitance 200-500 pF,

Goldring E2
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

   Βελόνα για την κεφαλή E3 Τιμή – €

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a “dual magnet” generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.
Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.
Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Τεχνικά Χαρακτηριστικά

ColourGreen
CantileverAluminium
Stylus profileSpherical
Stylus radius0.6 mil
Frequency range20 Hz – 20 kHz
Channel balance1.5 dB at 1 kHz
Channel separation>20 dB at 1 kHz
Sensitivity3.5 mV (1 kHz @ 5 cm/sec)
Static compliance20 mm/N
Vertical tracking angle20°
Load resistance47 kΩ
Load capacitance100 – 200 pF
Internal inductance400 mH
Internal resistance410 Ω
Cartridge mass6.9 g
Fixing centres12.7 mm (0.5 in)
Playing weight1.5 g – 2.5 g (2.0 g recommended),

Goldring E3
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings,

  Βελόνα για την κεφαλή E3 Τιμή – €

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a “dual magnet” generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.
Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.
Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Τεχνικά Χαρακτηριστικά

ColourViolet CantileverAluminium
Stylus profileElliptical
Stylus radius0.3 x 0.7 mil
Frequency range20 Hz – 20 kHz
Channel balance1.5 dB at 1 kHz
Channel separation>20 dB at 1 kHz
Sensitivity3.5 mV (1 kHz @ 5 cm/sec)
Static compliance20 mm/N
Vertical tracking angle20°
Load resistance47 kΩ
Load capacitance100 – 200 pF
Internal inductance400 mH
Internal resistance410 Ω
Cartridge mass6.9 g
Fixing centres12.7 mm (0.5 in)
Playing weight1.5 g – 2.5 g (2.0 g recommended),

Τεχνικά Χαρακτηριστικά

Output voltage at 1000 Hz, 5cm/sec: 5 mV
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 20 dB
Channel separation at 15 kHz: 15 dB
Frequency range at – 3dB: 20-20.000 Hz
Frequency response: 20-18.000 Hz + 3 / – 2 dB
FIM distortion at recommended
tracking force, DIN 45.542: < 1%
Tracking ability at 315Hz at
recommended tracking force: 70 µm
Compliance, dynamic, lateral: 7 µm/mN
Stylus type: Spherical
Stylus tip radius: R 26 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour: Black
Cartridge weight: 5 g,

Τεχνικά Χαρακτηριστικά

Output voltage at 1000Hz, 5cm/sec: 11 mV
Channel balance at 1kHz: 1,5 dB
Channel separation at 1kHz: 22 dB
Frequency range at -3dB: 20-20.000 Hz
Frequency response: 20-20.000 Hz – 3 dB
Tracking ability at 315 Hz at recommmende tracking force: 90 μm
Compliance, dynamic lateral: 12 μm/m N
Stylus type: Spherical
Stylus tip radius: R 18 μm
Tracking force range: 3,0 g (30 mN)
Tracking force recommended: 4,0 g (40 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 1.680 Ohm – Internal inductance: 920 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-400 pF
Cartridge weight: 5 g, 

Ανταλακτική βελόνα Stylus 3e,  

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.

Τεχνικά Χαρακτηριστικά

Output voltage at 1000 Hz, 5cm/sec.4 mV
Channel balance at 1 kHz2 dB
Channel separation at 1 kHz22 dB
Channel separation at 15 kHz15 dB
Frequency range at – 3dB 20-22.000 Hz
Frequency response 20-18.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *)60µm
Compliance, dynamic, lateral20 µm/mN
Stylus typeElliptical
Stylus tip radiusr/R 8/18 µm
Tracking force range1,5-2,0 g (15-20 mN)
Tracking force, recommended1,75 g (17,5 mN)
Tracking angle20°
Internal impedance, DC resistance750 Ohm
Internal inductance450 mH
Recommended load resistance47 kOhm
Recommended load capacitance200-600 pF
Cartridge colour, body/stylusBlack/Black
Cartridge weight5 g
Replacement stylus unit Stylus 3E,

Ανταλλακτική βελόνα Stylus 5e, 

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.

Τεχνικά Χαρακτηριστικά

Output voltage at 1000 Hz, 5cm/sec.4 mV
Channel balance at 1 kHz2 dB
Channel separation at 1 kHz22 dB
Channel separation at 15 kHz15 dB
Frequency range at – 3dB20-25.000 Hz
Frequency response20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *)65 µm
Compliance, dynamic, lateral20 µm/mN
Stylus typeElliptical
Stylus tip radiusr/R 8/18 µm
Tracking force range1,5-2,0 g (15-20 mN)
Tracking force, recommended1,75 g (17,5 mN)
Tracking angle20°
Internal impedance, DC resistance750 Ohm
Internal inductance450 mH
Recommended load resistance47 kOhm
Recommended load capacitance200-600 pF
Cartridge colour, body/stylusBlack/Black
Cartridge weight5 g
Replacement stylus unit Stylus 5 E,