Goldring 1012GX

This hand-built cartridge uses the acclaimed Gyger II nude diamond stylus. A fine-line elliptical type with a 6 µm small radius it gives smooth, extended highs, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. Because it fills the record groove more completely due to its larger major radius, the Gyger II represents a major upgrade over normal elliptical stylus types.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Βελόνα για την κεφαλή Goldring G 1012GX, Τιμή 225€

Τεχνικά Χαρακτηριστικά

Cantilever TypeAluminium
Stylus TypeGyger II (replaceable)
Stylus Tracking Radius6 µm (0.2 mil)
Equivalent Tip Mass0.45 mg
Frequency Response20 Hz – 20 kHz ± 3 dB
Frequency Range12 Hz – 42 kHz
Channel Imbalance1.0 dB max at 1 kHz
Channel Separation25 dB min at 1 kHz
Sensitivity5 mV ± 3 dB at 5 cm/s lateral
Static Compliance24 mm/N (lat); 16 mm/N (vert)
Trackability80 µm
Vertical Tracking Angle24 °
Load Resistance47 kΩ
Load Capacitance125 – 225 pF (175 pF nominal)
Internal Inductance470 mH
Internal Resistance820 Ω
Cartridge Mass6.2 g
Cartridge Mass (inc. fixings)7.6 g
Fixing Centre12.7 mm
Playing Weight1.5 – 2 g (1.75 g nominal)
Cartridge Height17 mm
Recommended Tonearm Effective Mass5 – 25 g,

,

Symphony
A body of long stored Ebony wood, boron cantilever and our famous Trygon PII-diamond tip provide the detailed image and musical perfection of our new generation with stunningfacilities.,

Γενικές Πληροφορίες

Τεχνικά Χαρακτηριστικά

Model  Symphony
Total mass:4,2 g
Frequency response: 20Hz – 100 kHz
Stylus shape: Trygon PII
Cantilever: Boron
Coil assembly: Absolute symmetrical design
Coil material:  Gold 24 Ct
Compliance: 15/15μ/mN
Recommended tracking force: 2,8 g
Crosstalk: > 30 dB
Channel differnce: < 0,5 dB
Output voltage: 0,7 mV (at 5 cm/sec)
Coil impedance: 50 Ohm
Body material: Ebony woodc
Electrical impedance 32 Ohms
Housing material Ebony wood,

Τεχνικά Χαρακτηριστικά

STANTON 680EL MkII CARTRIDGE

- Nominal Output, 5cm/sec.: 5.0 mV

- Frequency response ¹: 20-20,000 Hz

- Channel separation: 35 dB

- Stylus type: Elliptical diamond

- Stylus tip radius: 0.4 × 0.7 mil

- Tracking force range ²: 2.0 – 7.0 g

- Recommended tracking force range: 3.5 g

- Internal inductance: 900 mH

- Recommended load resistance: 47 kOhm

- Cartridge colour, body/stylus: Black/White

- Cartridge weight without screws: 5.5 g

- Replacement stylus unit: D6800 EL MKII

- 78RPM stylus: D6827

- Accessories included: 6 × Screws, 2 × Nuts, 1 × Owners Manual,

Super OM 5E
The Super OM 5E features improved lineraty, higher channel seperation, and an Elliptical stylus that provides balanced and distortion-free playback. The Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.

• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Τεχνικά Χαρακτηριστικά

Channel balance at 1 kHz 1.5 dB
Output voltage at 1 kHz, 5cm/sec 4 mV
Channel seperation at 1 kHz 22 dB
Channel seperation at 15 kHz 15 dB
Frequency response 20 Hz – 20 kHz 20-22.000 Hz + 3 / -3
Tracking ability at 315Hz at recommended tracking force 60 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1.5-2.0 g (15-20 mN)
Tracking force, recommended 1.75 g (17.5 mN)
Tracking angle 20°
Internal impedance, DC resistance 1 kOhm
Cartridge colour Black/Black
Cartridge weight incl. extra weight 5 g, excl. extra weight 2.5 g
Recommended load resistance 47 kOhm
Internal inductance 580 mH
Recommended load capacitance 200-500 pF,

The Stylus 2M Red is recommended for following cartridges:     2M Red,   2MR Red,   2M Red Premounted

Τεχνικά Χαρακτηριστικά

Frequency range – 20-22.000 Hz
Frequency response – 20-20.000 Hz + 3 / – 1 dB
Tracking ability at 315Hz at recommended tracking force *) – 70 µm
Compliance, dynamic, lateral – 20 µm/mN
Stylus type – Elliptical
Stylus tip radius – r/R 8/18 µm
Equivalent stylus tip mass – 0.5 mg
Tracking force range – 1.6-2.0 g (16-20 mN)
Tracking force, recommended – 1.8 g (18 mN)
Tracking angle – 20°
*) Typical value,   

Ανταλακτική βελόνα Stylus 5e,  

Super OM 5E
The Super OM 5E features improved lineraty, higher channel seperation, and an Elliptical stylus that provides balanced and distortion-free playback. The Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.

• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Τεχνικά Χαρακτηριστικά

Specifications
Channel balance at 1 kHz 1.5 dB
Output voltage at 1 kHz, 5cm/sec 4 mV
Channel seperation at 1 kHz 22 dB
Channel seperation at 15 kHz 15 dB
Frequency response 20 Hz – 20 kHz 20-22.000 Hz + 3 / -3
Tracking ability at 315Hz at recommended tracking force 60 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1.5-2.0 g (15-20 mN)
Tracking force, recommended 1.75 g (17.5 mN)
Tracking angle 20°
Internal impedance, DC resistance 1 kOhm
Cartridge colour Black/Black
Cartridge weight 2.5 g
Reccomended load resistance 47 kOhm
Internal inductance 580 mH
Recommended load capacitance 200-500 pF,

The half-inch standard mount .3 x .7 mil elliptical AT33EV cartridge features a tapered duralumin cantilever. Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with neodymium magnet for enhanced magnetic energy and PCOCC wire for pure audio transmission,

Τεχνικά Χαρακτηριστικά

Hand Made in Japan

Σώμα: Κράμα Ντουραλουμινίου

Τύπος: Dual Moving Coil Stereo

Πηνία: PCOCC

Cantilever: Ντουραλουμίνιο

Τύπος ακίδας: Elliptical

 Έξοδος: 0.3 mV

Απόκριση Συχνότητας: 15Hz – 50KHz

Διαχωρισμός καναλιών: 30 dB

Ισορροπία καναλιών: 0.5 dB

Βάρος Ανάγνωσης: 1.8-2.2 gr (standard 2.0 gr)

Εσωτερική Αντίσταση: 10 Ω

Συνιστώμενη Αντίσταση: ≥100 Ω

Στατική Ενδοτικότητα: 40 x 10-6 cm/dyne

Δυναμική Ενδοτικότητα: 10 x 10-6 cm/dyne

Βάρος: 6.9 g,

ATN81CP. Ανταλλακτική βελόνα για τις κεφαλές AT81CP, AT300P, AT3482P και AT3482H/U. Συμβατή με τις κεφαλές AT311EP, AT85EP. Τιμή 28 ευρώ,

The Audio-Technica AT-81CP is a moving magnet T4P pickup head. This 0.6 mil conical cartridge fits P-mount turntables,

Τεχνικά Χαρακτηριστικά

Hand Made in Japan

Τύπος: P-mount Dual Moving Magnet Stereo

Πηνία: TPC Cantilever: Carbon Fibre Reinforced ABS

Τύπος ακίδας: Conical Έξοδος: 3.5 mV

Απόκριση Συχνότητας: 20Hz -20KHz

Διαχωρισμός καναλιών: 18 dB

Ισορροπία καναλιών: 2.5 dB

Βάρος Ανάγνωσης: 1.0-1.5 gr  (1.25 g standard)

Συνιστώμενη Αντίσταση: 47 KΩ

Ανταλλακτική  βελόνα ΑΤΝ81CP,                                                                                                                                                                                                                                                                                             Αναβάθμιση με τη βελόνα ATN85EP

Βάρος: 6.0 gr,

Ανταλλακτική ελλειπτική βελόνα για τις κεφαλές AT311EP και ΑΤ85EP. Αναβάθμιση με τις κεφαλές AT81CP, AT300P, AT3482P. Τιμή 42 ευρώ.

 
This 0.3 x 0.7 mil elliptical cartridge fits P-mount turntables. It features precision engineering and many other features found in the more expensive Audio-Technica cartridges,

Τεχνικά Χαρακτηριστικά

Hand Made in Japan

Τύπος: P-mount Dual Moving Magnet Stereo

Πηνία: TPC

Cantilever: Ντουραλουμίνιο

Τύπος ακίδας: Elliptical

Έξοδος: 3.5 mV

Απόκριση Συχνότητας: 20Hz -20KHz

Διαχωρισμός καναλιών: 20 dB

Ισορροπία καναλιών: 2.0 dB

Βάρος Ανάγνωσης: 1.0-1.5 gr  (1.25 g standard)

Συνιστώμενη Αντίσταση: 47 KΩ

Ανταλλακτική βελόνα    ATN85EP                                                                                                                                                                                                                                                                                                                     
Συμβατή βελόνα ATN81EP

Βάρος: 6.0 gr,

Ανταλακτική βελόνα VMN95C. Συμβατή και με τις κεφαλές AT-VM95Ε, AT-VM95EN, AT-VM95ML, AT-VM95SH, AT-VM95SP. Τιμή 26 ευρώ,     

This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Τεχνικά Χαρακτηριστικά

Hand made
Τύπος: VM Dual Moving Magnet Stereo
Πηνία: TPC
Cantilever:Ντουραλουμίνιο
Τύπος ακίδας: Conical
Έξοδος: 4.0 mV
Απόκριση Συχνότητας: 20Hz -20KHz
Διαχωρισμός καναλιών: 18 dB
Ισορροπία καναλιών: 2.5 dB
Βάρος Ανάγνωσης: 1.8 – 2.2g (standard 2.0 g)
Συνιστώμενη Αντίσταση: 47 KΩ
Στατική Ενδοτικότητα: 17 x 10-6 cm/dyne
Δυναμική Ενδοτικότητα: 6.5 x 10-6 cm/dyne
Βάρος: 6.1 gr
Ανταλλακτική βελόνα VMΝ95C
Αναβάθμιση με τις ανταλλακτικές βελόνες VMN95E, VMN95EN, VMN95ML, VMN95SH Διαθέτει ενσωματωμένα μεταλλικά σπειρώματα τοποθέτησης χωρίς παξιμάδια,