BP50 is a Bluetooth preamplifier with HDMI ARC and CEC control. Support decoding up to 192kHz/24bits TV Audio with PCM format.  Also it utilizes the ESS Sabre ES9023P DAC, the DAC supports decoding up to 192kHz/24bits, and offers a dynamic range of 112db. By high resolution and high dynamics, the BP50 can reproduce more music details and bring better sound performance with your audio gears. 
You can play music from your phone, tablet, and laptop to your Hi-Fi stereo system. Experience the wireless convenience with BP50.
Powered by our Bluetooth 5.2 technology, featuring low latency and an extended range of over 10 meters. Playing music, movies, audiobooks, podcasts, and radio stations without disruptions, choppiness, or cut-offs.
It is built-in with ESS ES9023P DAC and QCC3040 Bluetooth chip. Which supports aptx HD, aptX LL, aptX Adaptive, and AAC high quality Bluetooth codec, transmit and receive HD music with your audio gears.
Whether it’s a movie from your TV, the classic turntable, the clarity of CDs, or the game sound of your laptop, BP50 enables you to effortlessly transmit these sources to your headphones by Bluetooth.

Τεχνικά Χαρακτηριστικά

Bluetooth Transmit  2x Bluetooth TX, able to connect up to 2 Bluetoothspeaker or earbuds.
Bluetooth Receiver  2x Bluetooth RX, able to connect up to 2 Bluetoothtransmitter device
Bluetooth Codec  TX: aptX HD, aptX, aptX AD, aptX LL, AAC, SBC
RX: aptX HD, aptX, aptX AD, AAC, SBC
Newest Firmware Version 0051-ba37596b
Frequency Response  20Hz to 20Khz   
THD + N/SNR  0.05%/>95db
Line in  Analog RCA, Max 2V RMS input
Phono in  Analog RCA, support MM/MC
Optical in  Up to 192kHz/24bit PCM only
HDMI ARC  PCM only, CEC function supported
USB Host  USB disk drive playback, support resume playback
Storage format: Fat16, Fat32, exFAT, up to 128GB
Support codec: mp3, mp4, wma, mov, m4a, aac, flac(96kHz/24bit), ape
USB Type-C    USB DAC for PC connection, sample rate: 48kHz
Subwoofer out   Max 3V RMS output, Cutting frequency: 250Hz
Line Out Max 2Vrms output
Optical out   48kHz/16bit output
Coaxial out  48kHz/16bit output
Power Input  12V/1A
Size  185 x 155 x 50mm
Weight   750g,

Περιγραφή

Up2Stream Plate AMP Build Your Wireless Streaming Audio System: Add WiFi, Airplay, Spotify Connect and Bluetooth
5.0 wireless capability to your DIY audio projects. Build a wireless speaker, wireless streamer or convert your
tranditional stereo system into advanced wireless multiroom streaming system.
Bring Multiroom Capabilities to Your Next Project: Our wide range of Up2Stream boards are small enough to fit in all
kinds of audio projects. Add an amplified streamer inside speaker boxes, or tiny receiver boards inside home theater
amps. Their size and powerful connectivity brings new life to vintage gear and new ideas for your next DIY build. *All
Arylic products are compatible with each other for multiroom installations.

Πληροφορίες Χρήσεως,

Τεχνικά Χαρακτηριστικά
Rated power output
2 x 40 watts at 4 ohms
2 x 20 watts at 8 ohms
Minimum load 4 ohm
Signal-to-noise ratio (SNR) ≥ 85 dB at max
Distortion <0.9% at 1kHz, 1 watts
Amplifier classification Class D
Frequency response 20 – 20.000 Hz (Sub out 20-200Hz)
Input sensitivity AUX max 1V RMS input
DSP Yes via ACPWorkbench
Speaker output channels 1
Jack in/out 1/0 3.5mm
USB connection
USB A for PC Connection (16bit/44.1kHz) and ACPWorkbench
Network connection WiFi + LAN
Bluetooth 5.0 AAC, SBC
Subwoofer pre-out 20-200Hz Max 2V RMS
App control Arylic 4Stream Appliciation Android/iOS
Equalizer (EQ) adjustment Via Arylic 4Stream Appliciation and ACPWorkbench Equalizer (EQ) profiles
Via Arylic 4Stream Appliciation and ACPWorkbench
Control software ACPWorkbench
Power requirements100-240 VAC, 50/60Hz, 1A,