Hifi Power
Μεγαλύτερη εικόνα

Electrocompaniet ECI 3

ΕΠΩΛΗΘΗ €

Electrocompaniet ECI 3 Integrated Amplifier, ολοκληρωμένος ενισχυτής, ισχύς εξόδου 8 ohms  2 x 70 W, 4 ohms 2 x 120 W, 2 ohms 2 x 160 W, αναλογικός προενισχυσης, έχει 1 είσοδο Balanced, 5 εισόδους Unbalanced, επίσης 1 έξοδο Balanced, 1 έξοδο Unbalanced και 2 εξόδους Unbalanced – RECOUT.  ΠxYxB 48,3×11,5×41 cm, ΒΑΡΟΣ 12kg,

Electrocompaniet ECI 3 High performance, fully balanced The Electrocompaniet ECI 3 is a DC coupled high performance, fully balanced, remote controlled integrated stereo amplifier, with six inputs: CD balanced, balanced output plus single ended tape output. The ECI 3 is equipped with a balanced, motorised volume control without sonic degradation, and all input switching is done by relays.

Volume up/down and input selection can be controlled using the four Navigator touch buttons on the front panel, or from the remote control. The selected input source is shown in the Navigator Window.

The ECI 3 features Electrocompaniet’s unique Floating Transformer Technology (FTT) power supply which is capable of delivering twice as much current as conventional designs. The ECI 3 is built with the same quality components as our most prestigious models. A 550 VA transformer, in FTT configuration, and a current reservoir of 40.000uF delivers 2 x 70 W of clean and powerful dynamics into an 8Ω load. Like all our amplifiers, the ECI 3 is stable in all loads down to 0.5 Ω.  The balanced output of the ECI 3 can feed an additional power amplifier in a bi-amped set-up.

Electrocompaniet_ECI_3   

Electrocompaniet_ECI3_open

  Πληροφορίες Χρήσεως    Παρουσίαση HIFI CHOICE 10 2009

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

All measurements are made at 120V / 240V  //50Hz / 60Hz
Preamplifier section    
Nominal Input impedance    330 kohm
Max. input level    > 10 Volt RMS
Equivalent input noise    < 4 µV
Input sensitivity for rated output (single)    0.6 V
Input sensitivity for rated output (balanced)    0.3 V
Amplifier section    
Output Impedance
(20 Hz – 20 kHz)    < 0,01 ohms
Max. peak current    > 60 A
THD
(measured at 1 kHz half power,8W)    < 0,005 % THD
(measured at 1 kHz -1 dB 8 W)    < 0,006 %
Rated output power    
8 ohms    2 x 70 W
4 ohms    2 x 120 W
2 ohms    2 x 160 W
Power consumption
(no load or signal)    70 W
Dimensions    
Width    483 mm / 19 inches
Depth    410 mm / 16.1 inches
Height    115 mm / 4.5 inches
Weight    12Kg / 26.4 lbs.