Hifi Power

McIntosh C70 Anniversary


McIntosh C70 Tube preamplifier, 70th Anniversary 2-Channel Vacuum Tube Preamplifier, Προενισχυτής με λυχνίες, 7 Αναλογικές Είσοδοι, 2 Balanced, 5 Unbalanced, Είσοδοι Phono MM, MC, Εξοδοι 2 Balanced 2 Unbalanced, Εξοδος Ακουστικών, Δυνατότητα ρύθμισης στάθμης των Εισόδων, Ρύθμιση Τονικότητας μπάσα πρίμα, Απόκριση συχνότητας Frequency Response, Στα +0 -0,5dB ΑΠΟ 20Hz to 20,000Hz και +0 -3dB ΑΠΟ 15Hz to 100,000Hz, Πολύ χαμηλή παραμόρφωση 0,08%, λυχνίες 5 Χ 12AX7A και 1x 12AT7, Διαστάσεις ΠxΥxΒ 44.5×15.2×45.7 cm Βάρος 11,3 kg,

The C70 70th Anniversary Vacuum Tube Preamplifier harkens back to yesteryear with an all analog design and a retro look. The glass front panel is inscribed with special McIntosh 70th Anniversary lettering.

The C70 features one 12AT7 and five 12AX7A vacuum tubes that are visible through a glass panel on the top cover. All control operations are done via knobs and rocker switches. Modern LED indicators will denote input selection and volume level. The C70 has seven inputs consisting of two balanced inputs, three unbalanced inputs, and one each of Moving Coil and Moving Magnet phono inputs. For outputs, there are two pairs each of balanced and unbalanced connections.

On the front panel, bass and treble tone controls are included and can be adjusted in 2dB increments via rotary knobs. Rotary knobs are also used to adjust the impedance and capacitance for the phono inputs. In addition to controlling the listening level, the volume knob can also adjust the relative volume balance between the left and right audio channels. A ¼” headphone jack powered by our High Drive headphone amplifier is included and features our Headphone Crossfeed Director (HXD®) technology. HXD brings added dimension to your music in a natural sounding way but can be turned off depending on your preferences. Five rocker switches are used to control the following functions: tone control on/ off; change between mono and stereo mode; HXD on/off; and to turn the independent output 1 and output 2 on/off.

The C70 sits atop a beautiful polished stainless steel chassis and features the timeless McIntosh black glass front panel, illuminated logo, control knobs, and aluminum end caps. Our Power Control technology is included with four ports that can automatically turn other connected McIntosh components such as amplifiers, CD players or turntables, on and off. Data ports are also present and can control basic functions of connected McIntosh source components via the C70’s remote control. Contact your local dealer to learn more.

C70_Front     C70_Tube

 

C70_Back 

Γενικές Πληροφορίες     Τεχνικές Πληροφορίες      Χρήσεως Πληροφορίες,

Τεχνικά Χαρακτηριστικά

Total Harmonic Distortion 0.08%
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 15Hz to 100,000Hz
Maximum Volts Out (Balanced / Unbalanced) 16/8 V RMS
Input Impedance (Balanced / Unbalanced) 44K ohm, 22K ohm
Phono Voltage Gain Moving Magnet: 40dB Moving Coil: 60dB
High Level Voltage Gain To Output 1 and 2: 15dB
Signal To Noise Ratio 100dB
Dual Mono Power Supply No
Dual Mono, Fully Balanced No
CONNECTIVITY
Balanced Input 2 Stereo
Unbalanced Input 3 Stereo + 2 Phono
Phono Input Moving Coil 1 (adjustable)
Phono Input Moving Magnet 1 (adjustable)
Digital Coaxial Input 0
Digital Optical Input 0
Digital MCT (DIN) Input 0
Digital USB Input 0
Digital AES/EBU Input 0
Balanced Fixed Output 0
Balanced Variable Output 2 Stereo
Unbalanced Fixed Output 0
Unbalanced Variable Output 2 Stereo
Headphone Output
1/4″ High Drive with Headphone Crossfeed Director (HXD®)
Record Processor Loop No
Input Level Match No
Home Theater PassThru No
Unbalanced Analog Connector Type Premium gold-plated solid brass
CONTROL
Tone Controls Bass and Treble
Tone Bypass and Input Assign
Tone Bypass: Yes
Input Assign: No
RS232 Control Input No
Power Control Output 2 Main, 2 Switched
Rear Panel Data Port 5
Rear Panel IR Sensor Input Yes
GENERAL SPECIFICATIONS
Multi-Chassis or Single Single, two layer
Output Meters No
Vacuum Tube or Solid State Vacuum Tube: (5) 12AX7A and (1) 12AT7
Power Consumption (On) 50 Watts
WEIGHTS & DIMENSIONS
Dimensions (W x H x D) 17.5″ (44.45cm) x 6″ (15.24cm) x 18″ (45.72cm)
Weight 25 lbs (11.3kg) Shipping Weight 41.4 lbs (18.8kg),